798780

Sogo SS-21830 Manual

12
Zoom out
Zoom in
Previous page
1/42
Next page
12
español english français portuguese deutsch italiano
REMOTE CONTROL CNNECTION
WARNING: To avoid personal injury or damage, be sure to turn o󰀨 the power to the main fuse box before wiring.
ASSEMBLING
Make sure you have all the components before beginning installation. To prevent damage, attach the motor
to the support rod on a soft surface or use the polystyrene contained in the package.
Yellow/Green
Bracket
Receiver place
Remote
control
Yellow/Green
1. Open the carton box and take out the fan (g. 1).
2. Assemble the support plate on the ceiling using two
or more screw anchors and appropriate washers.
Attention: the provided screw are for wood joist and
concrete ceiling. (g. 2).
3. Insert the support rod through the upper cap and
lower cap.
4. Insert the electric cables coming out from the motor
through the support rod and connect them to the
screw terminal placed on the top of support rod.
5. Fix the support rod to the motor using the pin and
pin’s nut. (g. 3)
6. Hang the fan on the hook on the support plate and
connect the electrical cable coming from the ceiling
to the screw terminal placed on the top of support
rod, make sure the receiver must be insert into
support plate (see Remote control connection).
7. Slide upwards the upper capand x it with the
screw. (g. 4)
8. Slide downwards the lower cap; it must be
supported by the motor. Fix it with the screw. (g. 4)
9. Center the slots on the blades with the heads of the
blades xing screws and slide the blades so that the
head of the screws are positioned at the end of slot.
(g. 5)
10. Tighten the screw. (g. 6)
11. Remove the screws from connect plate of the motor,
please organize all the wires carefully into connect
plate.Assemble and align the holes on the back of
LED light to the three screws on the connect plate of
motor. (g. 7)
12. Then tighten the three screws on the LED plate, connect the connector together with the motor wire,
please make sure the light kit can’t be moved after tighten the screws. (g. 8)
13. Place the lamp shade on the fan.(g. 9)
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-21830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-21830 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info