Manual Sogo SS-21375 (page 11 of 37) (English, German, French, Italian, Portuguese, Spanish)

798774

Zoom out

Zoom in

1/37

español english français portuguese deutsch italiano

ASSEMBLY

OPERATION

REMOTE CONTROLLERCLEANING AND MAINTENANCE

TECHNICAL DATA

Attention: the fan can only be used if

complete with the support base (base1 and

base 2).

Attention: always unplug the appliance

before you assemble.

To assemble it, refer to gure: positioning rst

the base1 (D) then the base 2 (E) on the body,

making sure to lock with 4 screws supplied (F);

REMINDING: there are 2 corresponding holes

at the base, the 2 pillars at the seat need to

pass through these 2 holes when assembly the

base onto the fans.

1. Before using the remote controller, remove

the plastic protection from the battery.

2. The remote controller battery is CR2025 type.

WARNNING: When not in use for long periods,

the plug must always be removed from the

socket.

Attention: before normal cleaning, remove

the plug from the socket.

•Clean the body with soft, slightly damp,

cloth; do not use abrasive or corrosive

products.

• Do not immerse any part of the fan in water

or other liquid: if this should happen, do

not put your hand in the liquid, but rst

remove the plug from the socket. Carefully

dry the appliance and make sure that all

the electrical parts are dry: in the case of

doubt, ask for professionally qualied help.

•It is essential that the motor’s air holes be

kept from dust and lint.

Power supply: 220-240V~ 50/60 Hz

Power: 45W

1. Plug the fan into the standard domestic

socket, the LED screen will display the

current room temperature.

2. Press the ON/OFF button ,the fan will

start running at Medium speed.

3. Press the SPEED button to select the

desired level, Low, Medium, High, the speed

level is displayed on the LED screen.

4. Press the MODE button to set the

fan as Normal Natural , or Sleep

mode , the mode is displayed on the LED

screen.

5. Press the OSC button , to allow the

fan oscillate the wind direction, to stop the

oscillation, press the OSC button again, the

maximum angle is 70 degree.

6. Press the TIMER button to set the

desired auto power o󰀨 time, the timer is from

1 to 12 hours, the interval is 1 hour.

NOTE1: The display becomes dark after

switch on 5 minutes, then press any button,

it will resume to bright as before.

NOTE 2: When press the button each time, it

will sound buzzing.

Control Panel

LED Display

D: Base 1

E: Base 2

F: Attachment screws

2 pillars

2 agujeros

correspondientes

2 corresponding

holes

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-21375 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sogo SS-21375 Manual

Product: