798869
9
Zoom out
Zoom in
Previous page
1/32
Next page
ASSEMBLY
COLUMN ASSEMBLY INSTRUCTIONS
Take the base (#11) and column parts
(#10) from the packing box. Fix the column
on the base plate using four screws (#12).
Unscrew the height adjusting knob. Mount
the column ornament, and move to the
desired height. Then screw the height
adjusting knob to tighten the extension
pole.
GRILLE & BLADE ASSEMBLY
( #1 - #6 ):
1. Set the rear grille (#5) to the motor housing
(#14) with the handle facing up.
2. Secure together by screwing the plastic
nut (#4) clockwise onto the motor housing
(#14).
3. Install the fan blade (#3) on the motor shaft
(#6)
the motor shaft.
4. Screw the plastic spinner (#2) on the motor
shaft (#6) to hold the fan blade (#3) in
place by rotating counterclockwise.
5. Install the front grille (#1) onto the rear
grille (#5). Be sure the clasps and hooks
on the grilles are aligned.
6. Close all the rim clasps to secure the
grilles (#1 and #5).
OPERATING INSTRUCTIONS
Ensure the fan is in the OFF
position before plugging into a
220-240V~ 50Hz outlet.
This fan has a 4 position push-button
control located at the front of the fan’s
upper column (#7):
[ 0 ] Pressing this button will power the fan
OFF.
[ 1 ] Pressing this button will power the fan ON
at LOW speed setting.
[ 2 ] Pressing this button will power the fan ON
at MODERATE speed setting.
[ 3 ] Pressing this button will power the fan ON
at HIGH speed setting.
This fan has 3 functions which will allow
you to better customize your preferred
air comfort as well as improve the air
circulation in the room:
OSCILLATION:
To activate the oscillation function for
widespread breeze distribution, simply
press the oscillation knob (#13) down
located on top of the fan’s motor house.
To turn off the oscillation function for a
targeted breeze setting, pull the oscillation
knob up. Controlling the oscillation can be
done while the fan is operating.
TILT:
To tilt the fan head so that the breeze is
targeted at an angle, steady the motor
housing of the fan with one hand and grip
the fan head with another, carefully tilt the
head of the fan until it reaches the desired
angle. This position will hold. Be careful as
to not tilt the head back further than it is
intended to go, doing so will damage the
unit.
HEIGHT ADJUSTMENT:
To adjust the height of the fan, grip the
extension column and loosen the height
adjustment locking nut (#9). Without
completely removing it, extend or lower the
column to increase or decrease the height
of the fan. Once the fan is at a comfortable
height, tighten the locking nut to secure the
column at this level.
CLEANING & MAINTENANCE
1. Always disconnect the cord from the
electrical outlet when cleaning your fan.
2. Light accumulated dust may be removed
by using a soft cloth to wipe away the dust
at the back grille of the fan.
3. Wipe the exterior surfaces of the fan
occasionally with a damp cloth (not
dripping wet) and dry thoroughly with a soft
dry cloth before operating the fan.
4. Do not use harsh cleaners or materials
to clean this unit, doing so will cause
damages to it.
STORAGE
1. Follow cleaning instructions 1-4 above.
Make sure to disassemble and clean fan
before storing.
2. Retain the original packaging to store your
fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or
put any stress on the cord where it enters
the fan as it could cause the cord to fray or
break.
HOUSEHOLD USE ONLY
9español english français portuguese deutsch italiano
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-21235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-21235 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info