798883
11
Zoom out
Zoom in
Previous page
1/34
Next page
11
español english français portuguese deutsch italiano
TECHNICAL SPECIFICATIONS
COMPONENTE
1. Heater body
2. Base plate
3. Tip over safety switch
4. Power cord
5. Control knob
ASSEMBLING OF THE UNIT
Assemble the body frame and the base plate together as the following instructions.
Remove the mounting screw from the bottom part of the body frame
Insert the power cord through the slot placed in the middle part of the basement and then assemble the body frame
to base plate
Secure the body frame to the base plate by tighten up the three mounting screw previously removed. Insert the
power cord through the suitable slots and then x it by clamp.
OPERATION
Plug in the appliance and make sure the wall voltage is similar to the appliance, also check that the outlet has
atleast 10 ampere current carrying capacity.
Turn the rotary knob on position I to switch on the heater with power of 500W and on to the position II to give you
the power of 1000W
Knob with sign is to turn on the oscillating mode of the heater. Turn on with "I" for 500W power and "II" for
1000W power. To switch off the appliance turn the knob on to the "OFF" position.
IMP: Remove the plug when not in the use.
SAFETY DEVICE
This appliance is provided with one safety device switch.
The safety device disconnects the appliance automatically, when the heater is tilted or fall, by means of a switch
situated in the lower part of the heater.
So to avoid this type of situation the appliance must be always placed on a flat and stable surface.otherwise it may
cause the apliance may not work.
CLEANING AND MAINTENANCE
The appliance need only an external regular cleaning
After every single use and before cleaning always unplug the appliance and wait till the heater gets cool.
Every now and then make sure to clean the grills from the dust.
Do not clean the painted parts with emery flour or solvents, use only a moistened cloth.
Model No Desc. Voltage Frequency Power
SS-18224 2 Carbon lament
heater 220-240V 50-60Hz 1000W
1
2
3
4
5
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-18224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-18224 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info