797966
26
Zoom out
Zoom in
Previous page
1/94
Next page
26 español english français portuguese deutsch italiano
1. LED screen: display the cooking and mixing time, weighing and status icon.
2. Time (TIME): the time setting key, touch the time setting key for access to the timing function, turn the
knob to adjust the minute (clockwise for increasing; counter clockwise for decreasing, and the set range
is 0~60 min), after the minute value is adjusted, touch the time setting button to conrm the minute
setting, then automatically access to the second setting, after the time value adjustment is completed,
touch any other function key to conrm. If you need to reset the time, retouch the time setting key
for adjustment and then repeat the process as mentioned above. in the process of setting, touching
any other function key will have all previous settings automatically stored, and the set increasing or
decreasing interval is 1 min and 1 second.
3. Temperature (TEMP): the temperature setting key, touch the temperature setting key for access to the
temperature setting function, turn the knob to adjust the temperature (clockwise for increasing; counter
clockwise for decreasing, and the set range is 0~120°C), after the temperature value is adjusted, touch
any other function key to conrm, If you need to reset the temperature, retouch the temperature setting
key for adjustment and then repeat the process as mentioned above. The default initial minimum
temperature is 30°C, and then 5°C will be taken as one gear for increasing or decreasing.
4. Speed (SPEED): the speed setting key, touch the speed setting key for access to the speed setting
function, turn the knob to adjust the speed (clockwise for increasing; counter clockwise for decreasing),
after the speed value is adjusted, touch any other function key to conrm, If you need to reset the speed
value, retouch the speed setting key for adjustment and then repeat the process as mentioned above.
Increasing or decreasing will be set with one gear at the unit, i.e. from Gear L to Gear 10, there are 11
gears in total. There are two modes: (1) under the heating mode, the speed can only be set on Gears
L~4, other high-speed gears cannot be set, and then after the heating value is set, the time must be set,
otherwise, the set speed gears could not work; (2) under the non-heating mode, the speed can be set on
Gears L~10. Note: Gear L is for low-speed stirring and commonly used to stir-fry and simmer,
5. Weight (WEIGHT): under the standby status, touch the electronic balance key for access to the
weighing function, what is displayed on the time domain is 0000 and Sign G, and the range is 0~3,000g.
Once the weighing is completed, retouch the weighing key to exit the electronic balance function and
return to the time display. If you need to reuse the weighing function, retouch the weighing key, and
touching the key for 3s can access to the zero-clearing function.
6. Pulse (PULSE): Touch the PULSE key for working at the speed of Gear 10; this function could only be
enabled if not heated and the temperature detected is not higher than 60°C. The time for touching and
holding such key should not be longer than 30s. In the process of stirring on Gears L~9; touching or
holding the PULSE key can work on Gear 10; after releasing the PULSE key, the machine will restore to
the previous speed status.
7. Shortcut Key (QUICK): After touching the shortcut key, the rst shortcut mode menu will start ickering;
turning the knob can realize switching of shortcut menu in turn; clicking the Start/Stop key will enable
the setup mode and start the process of countdown, and after the work is over, the buzzer will produce 3
sounds at the frequency of 1s, and then the screen will return to home.
8. Start/Stop Button: touching the key can control the machine’s start-up, pause or stop.
INSTALLATION PROCEDURES AND USE METHOD
Stirring/smashing/grinding Knead dough/stir-fry/stirring
(Prior to initial use of this Product, please thoroughly clean any part or component in contact with ingredient).
1. Introduction to the combination of functions
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-14555 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-14555 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info