Manual Sogo SS-1287 (page 23 of 88) (English, German, French, Italian, Portuguese, Spanish)

798726

Zoom out

Zoom in

1/88

español english français portuguese deutsch italiano

3.1 Frost Protection Function:

In cooling, dehumidifying or economic power saving

mode, if the temperature of the exhaust pipe is too low,

the machine will automatically enter protection status;

if the temperature of the exhaust pipe rises to a cer-

tain temperature, it can automatically revert to normal

operation.

3.2 Overflow Protection Function

When water in the water pan exceeds the warning

level, the machine will automatically sound an alarm,

and the “FULL” indicator light will flash. At this point,

you need to move the drainage pipe connecting the

machine or the water outlet to sewer or other draina-

ge area to empty the water (details see Drainage Ins-

tructions at the end of this chapter). After the water is

emptied, the machine will automatically return to the

original state.

3.3 Automatic Defrosting (cooling models have this

function):

The machine has automatic defrosting function.

3.4. Protection Function of the Compressor

To increase the service life of the compressor, it has

a 3-minute delay booting protection function after the

compressor is turned off

Drainage Instructions

1. Manual drainage:

1) When the machine stops after the water is full, turn

off the machine power and unplug the power plug

Notes: Please move the machine carefully, so as not

to spill the water in the water pan at the bottom of the

body.

2) Place the water container below the side water out-

let behind the body.

3) Unscrew the drainage cover and unplug the water

plug, the water will automatically flow into the water

container.

Notes:

1. Keep the drainage cover and the water plug pro-

perly.

2. During drainage, the body can be tilted slightly bac-

kwards.

3. If the water container cannot hold all the water, be-

fore the water container is full, stuff the water outlet

with the water plug as soon as possible to prevent

water from flowing to the floor or the carpe

4) When the water is discharged, stuff the water plug,

and tighten the drainage cover.

Notes: 1. Restart the machine after the water plug and

drainage cover are installed, otherwise condensate

water of the machine will flow to the floor or the carpet.

2. Continuous drainage (Optional) (only applicable to

cooling and dehumidifying mode), as shown in -

gure:

1) Unscrew the drainage cover, and unplug the water

plug.

2) Set the drainage pipe into the water outlet.

3) Connect the drainage pipe to the bucket.

Maintenance

Cleaning: before cleaning and maintenance, turn o󰀨

the machine and unplug the plug.

1. Clean the surface

Clean with surface of machine with a wet soft cloth.

Don’t use chemicals, such as benzene, alcohol, gaso-

line, etc.; otherwise, the surface of the air conditioning

will be damaged or even the whole machine will be

damaged.

2. Clean the lter screen

If the filter screen is clogged with dust, and the effe -

tiveness of the air conditioning is reduced, be sure to

clean the filter screen once every two weeks

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-1287 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sogo SS-1287 Manual

Product: