804713
14
Zoom out
Zoom in
Previous page
1/138
Next page
12
7. Daily use and operation
PM 2,5 sensor and LED ring
The current air quality is continuously determined
by Airfresh Clean 400 in the form of the PM 2.5
value.
The PM 2.5 value is the fine dust load
(50% of particles approx. 2.5μm) in μg/m
3
.
The illuminated LED ring on the upper side
indicates the current level of fine dust pollution
caused by different colours:
RED = high load (>50 µg/m³)
PINK = medium load (20 - 50 µg/m³)
LILA = low load (10 - 20 µg/m³)
BLUE = no load (0 - 10 µg/m³)
Please remove the protective ap in front of the PM2.5 sensor
(C) only in an emergency. Please do not allow any objects or
other foreign bodies to come into contact with the sensor.
Switching on and off
Press the ON/OFF button (L) to turn the
Airfresh Clean 400 on or off. The ON/OFF
control lamp lights up.
First press:
Device is switched on
Press twice:
Activates the automatic mode
Press the third time:
Deactivates the automatic mode.
Press four times:
Device is switched off
The control lamps light up accordingly.
Automatic mode
By pressing the (L) button as
described
above, the Airfresh Clean 400 is also set to
automatic mode. In this mode, the unit
automatically adjusts the fan speed in
relation to the air quality in the room. This
ensures you always get the best possible
air quality. The control lamp for AUTO
lights up.
Setting the operating time
Press button (I) to set the desired oper-
ating time. Choose between 2, 4 and 8
hours. The control lamp lights up ac-
cordingly. The device switches off auto-
matically after the time has elapsed. If
no operating time has been selected
(no indicator light is lit), the Airfresh
Clean 400 runs in continuous operation.
Changing the fan speed
Press button (K) to select the fan speed
and thus the desired intensity of air
discharge:
Low (I) - Medium (II) - High (III) -
Turbo (all indicator lights on)
UV-C lamp and night mode
Press button (J) once to switch on the
UV-C lamp inside the Airfresh Clean 400
(UV-C control lamp lights up). Press again
to activate the night mode without
switching off the UV-C lamp (UV-C con-
trol lamp lights up, NIGHT control lamp
flashes). By further pressing button (J)
you can switch off the UV-C lamp (UV-C
control lamp is off, NIGHT control lamp
flashes) or switch both off (UV-C control
lamp is off, NIGHT control lamp is off).
Night mode
In night mode, you can run the Airfresh
Clean 400 without being disturbed by
additional light sources. If you activate
the night mode, all indicator lights
on
the device are switched off after 10 sec-
onds without the device being switched
off. Previously made settings for operat-
ing time and fan speed are retained. The
activation of the night mode is initiated
by a flashing of the control lamp before
GB
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soehnle Airfresh Clean 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle Airfresh Clean 400 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 2.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info