675928
15
Zoom out
Zoom in
Previous page
1/138
Next page
13
Clean Connect 500 display. Press again to
turn off
Bluetooth®
.
If the Airfresh Clean Connect 500 is connected to a mo-
bile device, it can be controlled via the control console
of the housing as well as via the Soehnle Connect app.
UV-C lamp and night-time mode
Press the button (H) once to switch on
the UV-C lamp inside the Airfresh Clean
Connect 500 (UV-C indicator is on). Press
again to activate the night-time mode
without turning off the UV-C lamp (UV-C
indicator light is on, NIGHT indicator light
flashing). Press the (H) button again to
turn off the UV-C lamp (UV-C indicator
light is off, NIGHT indicator light flashes),
or turn off both (UV-C indicator light is off,
NIGHT indicator light is off).
Night mode
In the night-time mode, you can run the
Airfresh Clean Connect 500 without be-
ing disturbed by additional light sources.
Once you activate the night-time mode,
all indicator lights on the device will soon
be turned off without the device switch-
ing off. All previous settings for operating
time and fan speed will remain un-
changed. Activation of the night-time
mode is indicated by flashing of the indi-
cator light before the illumination switch-
es off completely.
The unit can run either in night-time mode or in au-
tomatic mode. These two modes cannot be activated
at the same time.
9. Cleaning and care
Cleaning the combination filter
Regular cleaning of the combination filter (1x
month) ensures faultless operation of the Air-
fresh Clean Connect 500 and the greatest possi-
ble room air quality.
Proceed as follows:
1. Switch the device off prior to cleaning and
disconnect the power plug.
2. Turn the device upside down and place it on
a solid surface (2.1).
3. Open the screw cap on the bottom of the
device (2.2).
4. Remove the housing base by lifting it up
(2.3).
5. Remove the combination filter (2.4) and
clean it. Replace the filter and ensure that it is
inserted correctly.
The pre-filter is attached to the lter with a hook and loop
fastener. Clean the pre-lter under running water. Ensure
that the pre-lter is dry before reattaching into the EPA
lter. EPA and activated carbon filter should be cleaned
only with a vacuum cleaner.
6. Close the device and fasten the screw cap.
Turn the device right side up and place it on
a solid surface.
7. Reconnect the power cord to a power outlet
and switch the device on.
Cleaning the housing
Switch the device off prior to cleaning and dis-
connect the power plug. Clean the housing of
Airfresh Clean Connect 500 with a slightly damp
cloth.
EN
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soehnle 68098 - Airfresh Clean Connect 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle 68098 - Airfresh Clean Connect 500 in the language / languages: All languages as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info