Manual Soehnle 63879 - Shape Sense Connect 50 (page 15 of 85) (All languages)

792757

Zoom out

Zoom in

1/85

A. Operating elements

1. Minus ( )

2. Confirm ( )

3. Plus ( )

B. Preparation

1. Insert batteries (3 x 1.5 V AAA).

Note:

Immediately (as long as "0.0" is still being dis-

played) place the body analysis scale on a lev-

el surface and wait until the scale powers

down automatically.

Then begin with data entry. Otherwise, it might

be possible that the weight of the scale would

erroneously be added to the initial weighting

process.

The same might occur during regular opera-

tion if the scale is held in the hand prior to the

weighting process.

2. For all measurements, place scale level on a

hard surface (not on carpet).

3. Cleaning and care: Clean only using a slightly

damp cloth. Do not use solvents or abrasives.

Never submerge scale in water.

4. A country-specific option to switch from kg/cm

to st/in or lb/in is possible by pushing the key

on the bottom of the scale to switch units

Attention! Slipping hazard in

case of wet surface.

C. Data input

1. Press button.

2. Use / buttons to select memory slot and

confirm with . ➞ P

3. Use the / buttons to set your height and

confirm with . ➞ H

4. In the next step, set your age and confirm

with . ➞ A

5. Set gender and confirm with . (Hold down

key for 3 sec.). ➞ S

6. Now immediately place the body analysis

scale

on the floor, wait until the screen displays "0.0"

and then step on the scale with bare feet.

The initial measurement is indispensable and

serves to store the data for later automatic

recognition of persons. If no person steps on

the scale, data input must be repeated. The

first body analysis is performed after a person

steps on the scale.

This scale is equipped with a Time-Out mode.

It will automatically switch off after approx. 40

seconds if no keys are pressed.

Alternative:

You can also perform this step conveniently via

the

Soehnle Connect app, in which case the data is

transferred to the scale. The first measurement is

necessary, however. Once you have entered the

data on the scale for the recognition of persons as

described under C, the Soehnle Connect app will

automatically adopt this.

D. Body analysis

1. Place scale on a solid, level floor and wait until

scale switches off automatically.

Step on the scale with bare feet. Stand still.

2. Body weight and the other calculated data are

displayed.

3. If the calculated values cannot be clearly allo-

cated to one user, the possible memory slots

will be displayed.

If the calculated weight can be allocated to more

than 2 users, other possible memory slots will

be displayed after 3 seconds.

Use the / keys ( = left, = right) to confirm

the memory slot displayed there.

The scale measures the individual body values

by means of bioimpedance analysis (body fat

percentage, body water, muscle mass), calcu-

lates the basic metabolic rate per day (kcal)

and the BMI (Body Mass Index).

The scale switches off automatically.

Note: If needed, the user can step off the

scale

as soon as the first value appears on the dis-

play.

Interpretation of measured values

In order to be better able to assess your measu

red

values, at the front of this operating manual you

will find an overview table, from which you can

take the commonly accepted optimal values.

The optimal range is marked in the table with a

J. Values outside this range are either too low (–)

or too high (+/++).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle 63879 - Shape Sense Connect 50 in the language / languages: All languages as an attachment in your email.

The manual is 3.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soehnle 63879 - Shape Sense Connect 50 Manual

Product: