Manual Soehnle 63870 - Shape Sense Profi 200 (page 6 of 38) (All languages)

662822

Zoom out

Zoom in

1/38

A. Operating elements

1. Minus ( )

2. Confirm (

)

3. Plus (

)

Sensor Touch:

Touch keys only slightly!

B. Preparation

1. Insert batteries.

Note:

Place the body analysis scale immediately on

a solid and even surface (as long as „0,0“ is

still displayed) and wait until the scale turns

off automatically.

Only then begin with data input. Note, it

might occur that the initial scale weight is

being added erroneously to the personal

weight process.

The same may happen during regular operati-

on, if scale is held in the hand prior to the

weight process.

2. Place scale level on a hard surface (not car-

pet). This applies for all measurements.

3. Cleaning and Care: use only a lightly damp

cloth for cleaning. Do not use solvents or

abrasives. Never submerge scale in water.

4. A country-specific option, to switch from kg/

cm to lb/in or st/in, is available on the back of

the scale by pushing key.

Attention! Slipping hazard

in case of wet surface.

C. Data input

1. Push key.

2. Use

/ keys to select memory slot. Use to

confirm.

3. Then use

/ keys enter body height and con-

firm.

4. Enter the age and confirm.

5. Select gender and confirm.

6. To finish, set activity level and confirm (Press

key 3 sec.).

1 Hardly any physical activity

Slight, active, sitting and

standing activity

House and yard work,

mainly standing, sitting

only occasionally.

Athletes and people with

plenty of movement

intensive trai-

ning: 5 - 10 h/

week

Heavy manual labourer,

highly active athletes

intensive trai-

ning: min. 10 h/

week

Athlete Mode: The respective calorie require-

ments can be precisely determined by setting

personal activity level.

7. Place the body analysis scale immediately on

the floor, wait until screen displays „0,0“.

Step barefoot on the scale.

The initial measurement is indispensable and

serves to store data for later automatic user

recognition. If user does not step on the scale,

data cannot be saved and must be entered

again.

The first body analysis is performed after a

user steps on the scale.

This scale is equipped with a Timeout mode.

It will automatically switch off after approx.

40 seconds, if no keys are pressed.

Data must be entered again after battery

change.

D. Body analysis

1. Place scale on solid and even surface and wait

until scale switches off automatically.

Step barefoot on the scale. Stand still.

2. The determined body weight is displayed. The

automatic recognition of user follows.

3. If the determined values cannot be clearly

allocated to one user, the possible memory

slots will be displayed.

If the determined weight can be allocated to

more than 2 users, other possible memory

slots will be displayed after 3 seconds.

Use the

/ keys ( = left, = right) to con-

firm the memory slot displayed there.

The scale measures body values (body fat,

body water, muscle mass), basic metabolic

rate (kcal) and BMI (Body Mass Index).

The 9-segment status bar shows the respecti-

ve deviation from the normal value (see over-

leaf).

The scale turns off auto matically.

63870-BA-PWD-Shape-Sense-Profi-200-14030-A-Content-05-11-2016.indd 4 05.11.2016 07:31:34

I can't input the activity no matter how many times i try Submitted on 12-9-2022 at 18:37
Reply Report abuse
I need to reset the scale as it was not programmed correctly when first used. then I want to program it to show BMI etc. Submitted on 11-5-2021 at 08:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle 63870 - Shape Sense Profi 200 in the language / languages: All languages as an attachment in your email.

The manual is 6,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soehnle 63870 - Shape Sense Profi 200 Manual

Product: