Manual Soehnle 63868 - Shape Sense Profi 100 (page 6 of 38) (All languages)

662823

6

Zoom out

Zoom in

Previous page

1/38

Next page

4

A. Operating elements

1. Minus ( )

2. Confirm (

)

3. Plus (

)

B. Preparation

1. Insert batteries.

Note:

Place the body analysis scale immediately on

a solid and even surface (as long as „0,0“ is

still displayed) and wait until the scale turns

off automatically.

Only then begin with data input. Note, it

might occur that the initial scale weight is

being added erroneously to the personal

weight process.

The same may happen during regular operati-

on, if scale is held in the hand prior to the

weight process.

2. Place scale level on a solid and even surface

(not carpet). This applies for all measure-

ments.

3. Cleaning and care: use only a lightly damp

cloth for cleaning. Do not use solvents or

abrasives. Never submerge scale in water.

4. A country-specific option, to switch from kg/

cm to lb/in or st/in, is available on the back of

the scale by pushing button.

Attention! Slipping hazard

in case of wet surface.

C. Data input

1. Push button.

2. Use

/ buttons to select memory slot. Use

to confirm.

Þ

P

3. Then use

/ buttons enter body height and

confirm.

Þ

H

4. Enter the age and confirm.

Þ

A

5. Select gender and confirm (Press

button

3 sec.).

Þ

S

6. Place the body analysis scale immediately on

the floor, wait until screen displays „0,0“ and

then step on the scale with bare feet.

The initial measurement is indispensable and

serves to store data for later automatic recog-

nition. If user does not step on the scale, data

cannot be saved and must be entered again.

The first body analysis is performed after a

person steps on the scale.

This scale is equipped with a timeout mode.

It will automatically switch off after approx.

40 seconds, if no buttons are pressed.

Data must be entered again after battery

change.

D. Body analysis

Place scale on solid and even surface. Wait

until scale switches off automatically.

1. Step barefoot onto scale. Stand still.

2. Determined body weight is displayed.

The automatic user recognition follows.

3. If the determined values cannot be clearly

allocated to one user, the possible memory

slots will be displayed.

If the determined weight can be allocated to

more than 2 users, other possible memory

slots will be displayed after 3 seconds.

Use the

/ keys ( = left, = right) to con-

firm the memory slot displayed there.

The scale measures body values (body fat,

body water) and BMI (Body Mass Index).

The 9-segment status bar shows the respecti-

ve deviation from the normal value (see over-

leaf).

The scale turns off auto matically.

Classification of body weight according to BMI

(Source: World Health Organisation, 2016)

BMI (kg/m²) classification

< 18.5 Underweight

18.5 - 24.9 Normal weight

25.0 - 29.9 Pre-Obesity

30.0 - 34.9 Obesity level I

35.0 - 39.9 Obesity level II

> 40.0 Obesity level III

EN

63868-BA-PWD-Shape-Sense-Profi-100-14028-A-Content-04-11-2016.indd 4 04.11.2016 17:21:50

1

I have a pacemaker and I was wondering if the Soehnle 63868 - Shape Sense Profi 100 weighing scales bmi function can be turned off in order to make the scales safe with pacemaker use? Submitted on 26-5-2023 at 07:31
Reply Report abuse
We have the new scaes model 563868. There is no manual and we do not know how to set up the actual start up to use these scales. Submitted on 8-9-2022 at 10:03
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Soehnle 63868 - Shape Sense Profi 100 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle 63868 - Shape Sense Profi 100 in the language / languages: All languages as an attachment in your email.

The manual is 5,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info