662827
6
Zoom out
Zoom in
Previous page
1/38
Next page
4
A. Operating elements
1. Switch on / Confirm (SET)
2. Plus (
)
3. Minus (
)
Sensor Touch:
Touch keys only slightly!
B. Preparation
1. Insert batteries.
Note:
Place the body analysis scale immediately on
solid and even surface (as long as „0,0“ is
still displayed) and wait until the scale turns
off automatically.
Only then begin with data input. Note, it
might occur that the initial scale weight is
being added erroneously to the personal
weight process.
The same may happen during regular operati-
on, if scale is held in the hand prior to the
weight process.
2. Place scale on solid and even surface (not
carpet). This applies for all measurements.
3. Cleaning and Care: use only a lightly damp
cloth for cleaning. Do not use solvents or
abrasives. Never submerge scale in water.
4. A country-specific option, to switch from kg/
cm to lb/in or st/in, is available on the back of
the scale by pushing key.
Attention! Slipping hazard
in case of wet surface.
C. Data input
1. Push SET key.
2. Use
/ keys to select memory slot and con-
firm (SET).
3. Then use
/ keys to enter body height and
confirm.
4. Set target weight and confirm (Press SET key
3 sec.).
5. Place the body analysis scale immediately on
the floor, wait until screen displays „0,0“ and
then step on the scale.
The initial measurement is indispensable and
serves to store data for later automatic recog-
nition. If no user steps on the scale, data
input must be repeated.
The first body analysis is performed after a
user steps on the scale.
This scale is equipped with a timeout mode.
It will automatically turn off after approx. 40
seconds, if no keys are pressed.
Data must be entered again after battery
change.
D. Body analysis
1. Place scale on solid and even surface and
wait until scale switches off automatically.
Step on scale. Please stand still.
2. Determined body weight is displayed.
Automatic user recognition follows.
3. If the determined values cannot be clearly
allocated to one user, the possible memory
slots will be displayed.
If the determined weight can be allocated to
more than 2 users, other possible memory
slots will be displayed after 3 seconds.
Use the
/ keys ( = left, = right) to con-
firm the memory slot displayed there.
4. The determined body weight, BMI (Body Mass
Index) and the difference to the target weight
is displayed.
The scale turns off auto matically.
Classification of body weight according to BMI
(Source: World Health Organisation, 2016)
BMI (kg/m²) classification
< 18.5 Underweight
18.5 - 24.9 Normal weight
25.0 - 29.9 Pre-obesity
30.0 - 34.9 Obesity level I
35.0 - 39.9 Obesity level II
> 40.0 Obesity level III
E. Notifications
1. Replace batteries
2. Overload: max. 180 kg
F. Technical data
Max. 180 kg / 100 g
Max. 396 lb / 0.2 lb
Max. 28 st / 0.2 lb
Batteriy requirement: 3 x 1,5 V AAA
EN
63863-BA-PWD-Style-Sense-Multi-200-14023-A-Content-02-11-2016.indd 4 03.11.2016 14:07:59
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soehnle 63863 - Style Sense Multi 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle 63863 - Style Sense Multi 200 in the language / languages: All languages as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info