488990
6
Zoom out
Zoom in
Previous page
1/46
Next page
4
A. Operating elements
1. Confirm (SET)
2. Minus (<)
3. Plus (>)
B. Preparation
1. Remove battery strip.
Note: Immediately (as long as „0.0“ is still
being displayed) place the body analysis scale
on a level surface and wait until the scale
powers down automatically.
Then begin data input. Otherwise, it might be
possible that the weight of the scale would
erroneously be added to the initial weighting
process.
The same might occur during regular operati-
on if the scale is held in the hand prior to the
weighting process.
2. For all measurements, place scale level on a
hard surface (not carpet).
3. Cleaning and Care: clean only using slightly
damp cloth. Do not use solvents or abrasives.
Never submerge scale in water.
4. A country-specific option to switch from kg/cm
to lb/in or st/in is possible by pushing the key
on the bottom of the scale to switch units.
Attention! Slipping hazard
in case of wet surface.
C. Data input
For the correct functionality of the body analy-
sis scale it is necessary to enter the personal
data of the respective person and then imme-
diately step on the scale with bare feet.
1. Place scale on a table to enter data.
2. Start data input (push SET key for 1 second)
3. Select memory slot (P1 … P8) (< = minus, >
= plus) and confirm (SET).
4. Enter body height (< = minus, > = plus) and
confirm (SET).
5. Enter age (< = minus, > = plus) and confirm
(SET).
6. Select gender using </> (
=
male, =female)
and confirm (SET).
7. Set the value of your individual activity level
according to the table (< = minus, > = plus)
and confirm (SET).
Activity level*
1-3 Persons with average
activity level, with
light work while sitting
or standing
Max. 2 hours/
day standing
or moving
4 Athletes, people with
plenty of movement
Intensive trai-
ning at least
5 hrs/week
5 Heavy manual
laborer,highly active
athletes
Intensive trai-
ning at least
10 hrs/week
8. The number of the memory slot is being dis-
played.
Push SET key and hold for 3 seconds
until “0.0” appears on the screen.
9. Now immediately place the body analysis
scale on the floor, wait until the screen dis-
plays „0.0“ and then step on the scale with
bare feet.
The initial measurement is indispensable and
serves to store the data for later automatic
recognition of persons. If no person steps on
the scale, data input must be repeated.
The first body analysis is performed after a
person steps on the scale.
This scale is equipped with a Time-Out mode.
It will automatically switch off after approx.
40 seconds if no keys are pressed.
Data must be entered again after battery
change.
*Note: For this model, the selection of the
activity levels 1-3 does not result in different
measurement results.
EN
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soehnle 63333 Body Balance Active Shape at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soehnle 63333 Body Balance Active Shape in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info