703199

SodaTrend Style Manual

19
Zoom out
Zoom in
Previous page
1/60
Next page
en 21
Exchanging the CO
2
Cylinder
If the strength of the bubbles diminishes
considerably, the CO
2
cylinder is empty
and must be replaced (see “Inserting the
CO2 Cylinder”).
Only ever use CO
2
cylinders of the same
type!
When you return an empty CO
2
cylinder
to an approved Soda Trend retailer, you
will receive a full one to replace it, paying
only the cost of a gas refi ll. A list of the
Soda Trend exchange points can be found
at www.sodatrend.de.
What About If...?
If the device does not work properly, fi rst
check whether you are able to rectify the
problem yourself. If the problem cannot be
solved with the steps that are listed below,
contact the customer service department.
Do not attempt to repair a defec-
tive device yourself!
The CO
2
-cylinder cannot be inserted.
The transport restraint has not been re-
moved from the cylinder holder:
► Press the ring-shaped lever on the
cylinder holder up as far as it will go;
the transport restraint will drop out.
The correct order when inserting:
► First screw the adapter hand-
tight onto the CO
2
cylinder head.
Then press the lever on the cylin-
der holder upwards, press the CO
2
cylinder with adapter as far as it will
go into the cylinder holder, do not
screw it in! If necessary, just twist it
slightly until it engages. Let go of the
lever again.
During the bubbling process, water
escapes from the water bottle.
The trigger button has not been pressed
for long enough or has been pressed too
quickly in succession.
► Keep the trigger button pressed down
for approx. 2 to 4 seconds and wait
longer before pressing it again.
The water bottle is too full.
► Pour away excess water.
During the bubbling process, there is
a hiss from the back of the device.
The adapter on the CO
2
cylinder is not
fi rmly tightened.
► Tighten the adapter.
The sealing ring in the adapter is missing.
► Replace the adapter.
The CO
2
cylinder valve does not close.
► Press the trigger button 1 to 2 times
so that the valve can close. If the
problem persists, allow the CO
2
cyl-
inder in the device to empty itself in
a well-ventilated place or outdoors.
Contact our customer service depart-
ment.
The strength of the bubbles is com-
paratively weak or there are no bub-
bles at all.
The CO
2
cylinder is empty.
► Replace the CO
2
cylinder.
The CO
2
cylinder is too cold (e.g. owing to
transport in winter).
► Allow the CO
2
cylinder to warm up
slowly at room temperature.
The water is too warm.
► Pour cold water into the water bottle.
Not enough water in the water bottle.
► Fill the water bottle up to the line
which is marked on it.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SodaTrend Style at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SodaTrend Style in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info