676499
7
Zoom out
Zoom in
Previous page
1/72
Next page
1. Place the PLAY™Drinks Maker
on a flat, sturdy surface, then
gently lay it down on its back with
the carbonating block facing
upwards.
2. Remove seal and cap from the
SodaStream CO cylinder.
2
Remove the carbonating bottle
stored inside the PLAY™and then
insert the CO cylinder into the
2
opening of the cylinder hollow at
TM
the base of the PLAY Drinks
Maker and turn the CO cylinder
2
clockwise while applying gentle
pressure until it is firmly held in
place. Hand-tighten only; do not
use tools.
TM
If the PLAY Drinks Maker is not
laying on its back with the
carbonating block facing
upwards, a safety gate will block
the cylinder hollow and you will
not be able to fully insert the
cylinder.
If using a 130L cylinder, remove
the cylinder adaptor collar by
pulling it out from the base of the
unit.
3. Place your PLAY™Drinks Maker
back in the upright position.
You are ready to create the
bubbles.
INSTALL THE CO CYLINDER
2
Adaptor
Collar
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sodastream Play at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sodastream Play in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info