68761

Snooper Syrius PROLINE S2000 Manual

54
Zoom out
Zoom in
Previous page
1/61
Next page
54
Return to contents
9.0 Speed Camera Alert Patterns
To enable your Syrius to alert you to Fixed Speed Cameras and Accident Black spots you will have to
register and download the Enigma™
Camera Database.
9.1 Fixed Speed Safety Cameras
As you approach a xed speed safety camera the unit will begin to provide both a voice alert stating
the type of camera you are approaching and the xed speed limit for that camera and a visual alert
displaying the same information. The unit will also provide an audible tone (either a Soft or Hard beep
depending on your personalised setting) and the Syrius will provide updated information indicating
the distance to the camera. As you move closer to the camera the ‘beeping’ will quicken. Once you
have passed the xed speed camera location, the unit will reset ready to alert you to the next potential
accident black spot.
To cancel an alert press the camera alert section of the screen the
denotes that the alert has been
muted
9.2 Risk Zones
The alert for a Risk Zone is the same as the Fixed Camera Alert.
9.3 SPECs Safety Camera Systems
Due to the fact that the SPECs camera incorporates a series of cameras that monitor a vehicles average
speed over a xed distance, a different alert pattern has been devised to ensure that your concentration
is maintained throughout the danger zone.
When approaching the rst camera in the SPECs system your Syrius will begin to alert you at
approximately 700 yards with a display indicating ‘SPECS START’ and emitting an audible alert.
The display will indicate the speed limit at this point and then count down the remaining distance to the
location of the camera. The unit will then emit an audible alert and ash ‘SPECS’ every few seconds to
remind you that you are still within the ‘SPECS’ system.
The Syrius will indicate the end of the SPEC’s sequence by displaying ‘SPECS END’ and emitting an
audible alert.
If after thirty seconds you do not pass another camera, for instance if you have turned off the road without
passing the last camera in the SPEC’s sequence, the warning will no longer be displayed.
Please Note: If you join a road in the middle of a SPECs series you will automatically get a visual
and audible alert, indicating the type of camera, 300 yards before the rst camera that you pass.
9.4 Saving User Points
If in the unlikely event that you pass the location of a safety camera and your Syrius does
not provide you with an alert, you have the opportunity to store the coordinates of that
location manually. Simply park safely and as close as possible to the site, then press and
hold the ‘M’ button for approximately two seconds. The following dialogue box will be
displayed.
Press the OK button to store the new location or press cancel if you do not wish to store
the new user point.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper Syrius PROLINE S2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Syrius PROLINE S2000 in the language / languages: English as an attachment in your email.

The manual is 9,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info