619619
10
Zoom out
Zoom in
Previous page
1/99
Next page
10 • EN
Return to contents
Start Up
The Micro-SD Card comes complete with digital mapping and is also where the
AURA™ camera database is stored if you choose to subscribe and download it.
Switch on the device by pressing and holding the standby power button located
on the top of the unit for 2 seconds. The Snooper will automatically synchronise
with the Micro-SD Card. Once the synchronisation is completed, the Micro-SD Card
will not function with any other device. Snooper is now ready to navigate and the
camera database can be downloaded if necessary. NOTE: In most cases the Micro-SD
card is already installed in the device.
Please note that if the unit does not activate when you press and hold the standby power button for 2 seconds it may require
charging. Refer to the section ‘Charging the internal battery’ later in this manual.
System Requirements and Downloading
Before you can begin to download the AURA™ database onto Snooper, you will need to install the Snooper Updater software
provided on the software CD.
In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.
Minimum Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8-bit)
colours or greater, a CD ROM drive, 20MB of free disc space and a spare USB connection.
Minimum Software Requirements
The software will only operate on the following Windows based operating systems:
Windows Vista
Windows 7, 8 and 8.1
and, in addition, will only work with Internet Explorer 6 or Netscape Navigator 6 or above.
NOTE: Snooper Updater software does not support Windows 95, 98, Millennium, 2000 , XP or Apple Macintosh operating
systems.
Software Installation Instructions
Place the Software CD into a CD ROM or DVD drive. The CD should auto run and launch the Snooper menu. Choose your language,
then, if you have registered, click ‘Next. Select the type of unit you have from: Ventura, Syrius or Truckmate. Follow the on screen
instructions.
To launch the CD manually: Click on Start and then Run. In the dialogue box that opens click on Browse – another dialogue box
will open. Locate your CD ROM or DVD drive (drive letter is normally D) using the Look in option and select Snooper from the lower
portion of the dialogue box. Once you have selected Snooper click on Open on the explorer box and then OK on the Run dialogue
box.
Any updates to the speed camera updater software can be obtained from www.snooperneo.co.uk/software.cfm. If you have any
problems using this software please call 0333 240 1000 during office hours and select Option 3.
Once the software is installed, you are ready to download the speed camera database onto Snooper. Once the initial setup is
completed the speed camera updater software icon is displayed on your desktop.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper SC5700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper SC5700 in the language / languages: English as an attachment in your email.

The manual is 16,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info