619689
13
Zoom out
Zoom in
Previous page
1/20
Next page
Operating Instructions
Starting Up
After you have successfully installed your S2 it is time to perform the first start
up. Firstly make sure your vehicle is parked in as open a space as possible,
clear of tall trees and buildings so that the built-in GPS antenna has a clear
view of the sky above. Next power the unit up by turning the on/off/volume
towards you. The S2 will go through a brief self test procedure and the
central red LED will then flash indicating that the unit is searching for
satellite connection. The S2 needs to acquire a minimum of 4 satellites to
work effectively, once this has been achieved the LED will turn green and will
stop flashing. Once the solid green LED is displayed your S2 is ready for use
and will now automatically alert you of any locations stored in it’s database as
well as laser alerts.
As the GPS engine and antenna have never been used before, the first
’Cold’ start up could take somewhere between 5 - 30mins. Once initialised,
subsequent start ups will take as little as 3 mins.
1. Mute Button
If during an alert you decide that you would like to mute it, simply press
the ’Mute’ button briefly. The LED s will continue to display a visual alert
but no sound will be heard. After you have travelled out of range of the
location the device will automatically reset so that next time you
encounter a location you will receive both audible and visual alerts as
normal.
2. Setting Brightness
You can adjust the brightness of the display on your S2 by pressing the
MUTE/DIM button when the unit is not detecting or locating a signal. There
are 2 levels of brightness to choose from bright or dimmed.
OPERATING INSTRUCTIONS
OPERATINGINSTRUCTIONS
13
Return to Contents Page
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper S2 Neo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper S2 Neo in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info