619689
9
Zoom out
Zoom in
Previous page
1/20
Next page
Installing your Snooper S2 using the Hook and Loop fastener
The Snooper S2 can be installed anywhere on the dashboard as long as the
built-in GPS antenna has a clear view of the sky and you can easily see the
LED display and operate the controls safely. You will also need to be sure
that you can connect the power connection cable. Your S2 can be installed
easily with the hook and loop fastener if you have a sufficiently flat area on
your dashboard. Follow these instructions to mount the control panel in this
way.
Use a damp cloth to thoroughly clean the bottom of the S2 and the area
where you intend to mount your unit.
With the two parts of the Hook and Loop fastener still fastened together,
peel the backing tape from the softer ’Loop’ side of the fastener and apply
it to the bottom of the unit.
Next remove the backing tape from the ’Hook’ side of the fastener, again
whilst the two parts are still fastened and position the unit onto the desired
area. If possible leave the Hook and Loop fastener for 24hrs to adhere
properly before using regularly.
Finally plug the smaller plug on one end of the power cable into the socket
marked DC12V on the back off the S2 and plug the larger plug into the
cigarette lighter socket of your vehicle. Your Snooper S2 is now ready for
use. For further information please read the section on Power Connection
on page 10.
INSTALLATION
INSTALLATION
9
Return to Contents Page
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper S2 Neo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper S2 Neo in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info