619630
11
Zoom out
Zoom in
Previous page
1/107
Next page
11 • UK
Return to contents
8series100614
Start Up
The SD Card comes complete with digital mapping and is also where the AURA™
camera database is stored if you choose to subscribe and download it.
Start by moving the ‘Batt. ON/OFF’ switch located on the back of the unit to the ‘ON’
position. Switch on the device by pressing and holding the standby power button
located on the top of the unit for 2 seconds. Press the ‘Navi’ icon. When the ‘Navi’ icon
is pressed the 8 Series will automatically synchronise with the SD Card. Once the
synchronisation is completed, the SD Card will not function with any other device.
8 Series is now ready to navigate and the camera database can be downloaded if
necessary.
Please note that if the unit does not activate when you press and hold the standby power button for 2 seconds it may require
charging. Refer to the section ‘Charging the internal battery’ later in this manual.
System Requirements and Downloading
Before you can begin to download the database onto 8 Series, you will need to install the 8 Series Updater software provided on the
software CD.
In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.
Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8-bit)
colours or greater, a CD ROM drive, 20MB of free disc space and a spare USB connection.
Software Requirements
The software will only operate on the following Windows based operating systems:
Windows Vista
Windows 7
Windows 8 and 8.1
and, in addition, will only work with Internet Explorer 6 or Netscape Navigator 6 or above.
NOTE: 8 Series Updater software does not support Windows 95, 98, Millennium, 2000 , XP or Apple Macintosh operating
systems.
Software Installation Instructions
Place the Software CD into a CD ROM or DVD drive. Your PC should automatically open a window displaying the instructions for
installing the software. Follow the instructions onscreen to install the speed camera updater software.
To launch the CD manually: Click on Start and then Run. In the dialogue box that opens click on Browse – another dialogue box
will open. Locate your CD ROM or DVD drive (drive letter is normally D) using the Look in option and select 8 Series from the lower
portion of the dialogue box. Once you have selected 8 Series click on Open on the explorer box and then OK on the Run dialogue
box.
Please make sure that the operating system installs the new hardware first before installing the Camera Updater software. Once the
updater software has been installed click ‘Finish’ and then close the CD auto run window. After installing the software, click ‘Start’
then All Programs’ and select the updater program to start it. Select your ‘Language’, Vehicle Type and ‘Download Settings when
prompted.
Any updates to the speed camera updater software can be obtained from www.snooperneo.co.uk/software.cfm. If you have any
problems using this software please call 0333 240 1000 during office hours and select Option 3.
Once the software is installed, you are ready to download the speed camera database onto 8 Series. Once the initial setup is
completed the speed camera updater software runs automatically in the background. This is indicated by the symbol
,
,
, which is located in the system tray in the bottom right hand corner of your desktop near the system clock.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper PRO S8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper PRO S8000 in the language / languages: English as an attachment in your email.

The manual is 12,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snooper PRO S8000

Snooper PRO S8000 User Manual - German - 96 pages

Snooper PRO S8000 User Manual - Dutch - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info