619679

Snooper Evolution Manual

16
Zoom out
Zoom in
Previous page
1/28
Next page
16
6. Mute Button
If during an alert you decide that you would like to mute the audible alert, but
still retain a visual alert simply press the MUTE/CANCEL button briefly
(Button 1). The screen will continue to display a visual alert but no sound will
be heard. After you have travelled out of range of the location the unit will
automatically reset so the next time you encounter a location you will receive
both an audible and a visual alert as normal.
7. Alert Pattern
Fixed Speed Safety Cameras
As you approach the fixed speed safety camera the unit will beep twice then
begin to emit either a voice alert or your chosen audible alert (either a Soft or
Hard ‘beep’) at your preset alert distance. As you continue to approach the
fixed speed safety camera the ‘beeping’ will quicken. At the same time the
display will indicate the type of location you are approaching, then the speed
limit at that location and then begin to count down the distance in 50 metre
increments to that location. Once you are less than fifty metres away from the
fixed speed safety camera the unit will alternate the display showing
‘Warning’ and the speed limit for that fixed speed safety camera location.
Automute
When your device alerts you to a location, rather than continually beeping
through the alert, it simply beeps at your selected volume for five seconds
and then automatically mutes the sound to volume level 3 until you are out of
range of the source. This allows you to receive a brief audible alert instead of
a continuous one.
If you would like to change the alert to a visual alert only press the
MUTE/CANCEL button to temporarily turn off the sound. If at any time you
would like to stop the alert, simply press and hold the MUTE/CANCEL button.
8. Saving New Coordinates
If in the unlikely event that you pass the location of a fixed speed safety
camera and your Snooper Evolution does not provide you with an alert, you
have the opportunity to store the coordinates of the location manually. Simply
park safely as close as possible to the site and press and hold the ‘New
Location’ button (button 3) for approximately two seconds. If the voice setting
on your unit is switched on the unit will confirm the location has been added
by saying ‘User data stored’ and the screen will display ‘Save M’ and the
number of the location in your unit’s memory.
When you next pass the site your Snooper Evolution will now alert you to that
new location. As you approach the fixed speed safety camera the unit will
display ‘User Pnt’ and provide either a voice alert stating the location as a
‘Risk zone’ or your chosen audible alert. Your unit can hold up to 99
coordinates in its memory.
Operating Instructions
Operating Instructions
Return to contents
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper Evolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Evolution in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snooper Evolution

Snooper Evolution User Manual - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info