Manual Snooper Evolution Plus (page 18 of 31) (English)

619681

Zoom out

Zoom in

1/31

The advantage of a laser speed gun is that the size of the "cone" of light that

the gun emits is very small, even at a range like 1,000 feet (300 meters). The

cone at this distance might be 3 feet (1 meter) in diameter. This allows the

gun to target a specific vehicle. A laser speed gun is also very accurate. The

officer has to aim the laser speed gun at a specific target therefore the officer

will only target your vehicle if the officer deems that you are speeding.

How Does Police Laser (LIDAR) Work?

LIDAR is an acronym for Light Distance And Ranging. A LIDAR gun emits a

highly focused beam of invisible light, in the near infrared region of light that

is centered at 904nm of wavelength and is only about 22 inches (56cm) in

diameter at 1000 feet (300m). Unlike RADAR which directly determines a

vehicle's speed by measuring its Doppler shift, LIDAR calculates speed by

observing the changing amount of time is takes to "see" reflected pulses of

light over a discreet amount of time.

8. Saving New Coordinates

If in the unlikely event that you pass the location of a fixed speed safety

camera and your Snooper Evolution does not provide you with an alert, you

have the opportunity to store the coordinates of the location manually. Simply

park safely as close as possible to the site and press and hold the ‘New

Location’ button for approximately two seconds. If the voice setting on your

unit is switched on the unit will confirm ‘User data stored’ and the screen will

display ‘M’ and the number of that location in your unit’s memory.

You may also wish to use this feature to store your own ‘high risk zones’ or

‘accident black spots’.

When you next pass that location again your Snooper Evolution will now alert

you to that location. As the unit does not know what type of system you are

passing the unit will display ‘User Pnt’ and give either a voice alert stating the

location as a ‘Risk zone’ or your chosen audible alert. Your unit can hold up to

a maximum of 99 coordinates in its memory

Troubleshooting – Saving New Coordinates

When you attempt to save a new coordinate but the display reads ‘Weak Sig’

it means that your Snooper Evolution is not receiving sufficient signal strength

to plot the position. Please ensure that the Snooper Evolution built-in GPS

antenna has a clear view of the sky, the unit is displaying the standby screen

and try again.

When you attempt to save the new coordinate and the display reads ‘Mem

Full’ it means that the memory in your Snooper Evolution is completely full. If

Operating Instructions

Return to contents

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Snooper Evolution Plus in the language / languages: English as an attachment in your email.

The manual is 7,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Snooper Evolution Plus Manual

Product: