619717

Snooper DAB2000 Audio adaptor Manual

20
Zoom out
Zoom in
Previous page
1/40
Next page
STARTING UP THE SYSTEM
1. Turn on your vehicles audio system.
2. Enable the AF function on your vehicle radio if it is equipped with it (consult
your vehicle radio manual or contact the vehicle dealer to determine if your
vehicle radio has the AF feature, and how to enable AF feature).
3. Tune the vehicle radio’s FM frequency to FM 87.6 MHz, which is the same as
the DAB2000’s default FM TX frequency.
4. Switch on the DAB2000 by plugging the vehicle charger into the vehicles
power point, the audio system display will show 《 DABRADIO 》.
5. The DAB2000 will perform a scan for DAB stations automatically.
6. If FM 87.6 MHz is already used by a FM broadcaster or the frequency is
‘noisy’, change the initial FM TX frequency as below:
Operation on DAB2000
Press and hold the FM button for three seconds; the DAB2000 will
select a new and clear frequency to transmit the FM signal.
Operation on vehicle radio
Use the ‘auto scan’ function of your vehicle’s radio to search for an
FM broadcast displaying the service name 《 DABRADIO 》. Stay
tuned to this frequency. Your DAB2000 and the vehi cle radio are
now synchronized.
7. If your vehicle’s radio does not have the AF feature, do the following to
change DAB2000’s FMTX mode to ‘auto scan’ instead of the default AFC_H.
7.1 Press the MENU button and then turn the Rotary Knob [◄] [►] until
the display shows 《 FM MODE 》.
7.2 Press the Rotary Knob to confirm, and then turn the Rotary Knob [◄]
[►] until the screen displays 《 AUTOSCAN 》.
7.3 Press the Rotary Knob to confirm, the function of ‘auto scan’ is now
enabled and the DAB2000 is operating in ‘auto scan’ mode.
8. Listen to the DAB stations. Please refer to the USING REMOTE CONTROL
KEYS section for further information.
9. While you are using the ‘auto scan’ function and you experience noise on
the DAB station you are listening to, please refer to the USING REMOTE
CONTROL MENU KEY section, To enable auto scan to select an auto
scanned FM frequency, or To set the FM transmitting frequency setting
to manuall
y switch to another FM frequency.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper DAB2000 Audio adaptor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper DAB2000 Audio adaptor in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info