619717
14
Zoom out
Zoom in
Previous page
1/40
Next page
Securing the DAB2000 module, Step by Step
To secure the DAB2000 module in your chosen location using the supplied hook &
loop tape and/or screws, please do the following:
1. Locate the positions on the back of DAB2000 module and your chosen store
location (e.g. in the centre front of the vehicle or behind the vehicle’s glove
compartment) where you want to apply the hook and loop tapes.
2. Clean both the surfaces on the DAB2000 module and your chosen l ocation,
with alcohol if available and wipe dry before you start.
3. Remove one side of the backing from the two pieces of hook and loop tape and
adhere them onto the back of DAB2000 on the marked positions as per the
diagram above.
4. Remove the other side of the backing and adhere the DAB2000 module to the
chosen location with the DAB2000’s cables and connectors to the back.
5. Carefully, separate the two pieces of the hook and loop tape so that the
DAB2000 module and the location each has a piece of the tape.
6. Apply the pressure evenly to all four pieces on the DAB2000 module and the
location, so that the tapes adhere to both surfaces securely.
7. Wait eight hours for the adhesive to cure and bond to the surfaces, and then
join the pieces together.
8. Alternatively, or in addition, you can secure the DAB2000 module in place with
the screws supplied.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper DAB2000 Audio adaptor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper DAB2000 Audio adaptor in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info