619652
6
Zoom out
Zoom in
Previous page
1/15
Next page
UK • 6
Return to contents
Installing the 4ZERO
For optimal results mount the 4ZERO onto the vehicles windscreen or alternatively mount it on to the dashboard.
When installing your 4ZERO please consider the following:
The unit, with its built in GPS antenna has a clear view of the sky*
It is located in a position where you can easily view the OLED display without having to take your eyes too far from the road
ahead and that you can reach the controls safely.
When the power cable is attached it must not impede the safe operation of the vehicle or its controls.
The positioning of the device must not impair the driver’s vision.
Does not jeopardise the drivers or passengers safety
You will be able to remove the device when the vehicle is left unattended and to perform downloads.
Please Note: Some vehicles may come with a ‘Solar Reflective, ‘Metal Oxide’ or Athermic’ windscreen which will affect the
performance of the built in radar laser detector. If your car has this type of screen try and locate a section of the screen
that is clear. This can sometimes be found near the rearview mirror or at the centre of the screen just above the dashboard.
Unfortunately if your car windscreen does not have a clear area it will not be possible to use the 4ZERO. If you are unsure what
type of windscreen is fitted to your vehicle then please contact your local vehicle dealer or manufacturer for further information.
Once you have found a suitable location for your 4ZERO secure it in place by using the suction cup windscreen bracket or hook and
loop fastener, remembering to clean the area where the bracket is going to be positioned thoroughly before hand to ensure good
contact. More detailed installation instructions follow.
PLEASE NOTE: Be careful to choose a location that does not block the drivers view or where it might endanger the driver or
passengers should your vehicle suddenly come to a stop or be involved in an accident.
Installing your 4ZERO using the Windscreen Suction Cup bracket
You can mount your 4ZERO to the inside of your vehicles windscreen using the suction cup windscreen bracket provided. Simply
select a position within the windscreen so that the top of the unit has a clear view of the sky, remembering that you need to connect
the power cable as well as ensuring that you can read the display and reach the controls safely.
Install the suction cups onto the bracket by fitting them into the holes (if required).
Clean the area where you wish to position the bracket thoroughly with a good quality glass cleaner
Adjust the bracket to the rake of the windscreen by carefully bending it so that when the 4ZERO is mounted onto the windscreen
it is parallel to the road ahead. The display must be facing the driver and the controls should be within reach of the driver.
Installing your 4ZERO using the Hook and Loop Fastener
The 4ZERO can be installed anywhere on the dashboard as long as the built in GPS antenna has a clear view of the sky and you can
easily see the display and operate the controls safely. You will also need to be sure that you can connect the power cable. Your 4ZERO
can be installed easily with the hook and loop fastener provided if you have a sufficiently flat area on your dashboard.
Use an alcohol wipe or similar cleaner to thoroughly clean the bottom of your 4ZERO and the area of the dashboard where you
intend to mount your unit.
Apply the hook’ portion of the fastener to the dashboard and the loop portion to the underside of your 4ZERO.
DO NOT leave the unit in view when the car is stationary during hot conditions. Exposing the 4ZERO to extremely high
temperatures can temporarily impair performance. Keep the 4ZERO out of sight when not in use to help avoid theft.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper 4Zero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper 4Zero in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info