Manual Snom PA1 (page 14 of 102) (English, German, French, Italian, Spanish)

477783

Zoom out

Zoom in

1/102

snom PA1 Quick Start Guide

red power LED is blinking.

3. After the reset (or the aborted DHCP client setup) the PA1 will use the

default network settings:

IP address: 192.168.0.2

Netmask: 255.255.0.0

The red LED stops blinking and glows red steadily.

4. When the PA1 boot up process is ﬁnished and the web interface is

available, the green LED lights up.

5. Connect your computer to the same network as the PA1, open

a browser and type the default IP address in the address bar:

http://192.168.0.2. The PA1 web interface will be loaded into the

browser.

6. Click on "Advanced" in the menu on the left side of the window page.

7. At Network > DHCP click on "Off".

8. Obtain the network IP address, netmask, and any other network settings

that may be necessary from your network administrator.

a. Text ﬁeld of Network > IP address: Replace default value by

network IP address.

b. Text ﬁeld of Network > Netmask: Replace default value by network

netmask.

c. Change other network settings, if necessary.

9. Click on "Save" at the bottom of the page.

10. The question "Apply setting changes?" appears at the top of the page.

Click on "Reboot".

11. You will be asked again whether you wish to reboot. Click on "Yes".

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Snom PA1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Snom PA1 Manual

Product: