809893
12
Zoom out
Zoom in
Previous page
1/30
Next page
12
snom PA1+ User Manual Initializing and conguring
Initializing
After the PA1+ has been connected to the network via Ethernet cable, the red LED marked "Power"
will light up. The PA1+ begins to boot.
Initializing with DHCP
The Snom PA1+ has a built-in DHCP client. When DHCP is available in the network, the PA1+ will
initialize automatically.
1. The red LED begins to blink. The PA1+ is sending the DHCP request.
2. After the PA1+ has received an IP address and other network-related settings (netmask, IP
gateway, DNS server, etc.) from the DHCP server, the red LED stops blinking and glows red
steadily, indicating that the application is starting up.
3. When the PA1+ boot-up process is nished and the web interface is available, the green LED
lights up in addition to the red one.
4. Briey press the button labelled "IP/Reset" to listen to the oral announcement of the IP address
(in English) over the loudspeaker or headset.
5. Open a web browser on a PC connected to the same network as the PA1.
6. Type the IP address into the address bar after http:// and press "Enter" to open the PA1's web
interface.
7. Continue with "Security settings" on page 14.
Initializing without DHCP
If your network does not support DHCP, the Snom PA1+ will boot with the default settings. Please
obtain the network IP address and netmask and, if applicable, other required network settings from
your network administrator. The default settings are:
IP address: 192.168.0.2
Netmask: 255.255.0.0
1. The red LED begins to blink. The PA1+ is sending the DHCP request.
2. Press the button labelled "IP/Reset". The red LED continues to blink.
Note: It may take a few minutes before the PA1+ aborts the DHCP request and starts the
application with the default settings.
3. When the application is starting up with the default network settings, the red LED stops to blink
and glows red steadily.
4. When the PA1+ boot up process is nished and the web interface is available, the green LED lights
up in addition to the red one. You can now change the default settings manually.
Note: Briey press the button labelled "IP/Reset" to listen to the oral announcement of
the default IP address (in English) over the loudspeaker or headset.
5. Open a browser on a computer connected to the same network as the PA1+, and type the default
IP address in the address bar: http://192.168.0.2. The PA1+ web interface will be loaded into the
browser.
6. Click Advanced in the menu on the left side of the window. The Advanced page opens to the
Network tab.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom PA1 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom PA1 plus in the language / languages: English as an attachment in your email.

The manual is 1.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info