809893
5
Zoom out
Zoom in
Previous page
1/30
Next page
5
snom PA1+ User Manual Important information
Important information
Please read the instructions on safety and disposal and on how to set up and use the device before
using it and also give them to other users to read or inform those users of their contents. Save this
manual and do not give the device to third parties without it.
The nameplate is located at the bottom or rear of the product.
Safety instructions
Follow the instructions in this manual and other applicable documentation of the device.
Warning: The product included (ITE) in this manual is to be connected only to PoE networks
without routing to the outside plant.
The socket outlet for the power adaptor must be near the equipment and easily accessible.
Mount the device only at heights not exceeding 2m.
If the device is not supplied with power via an Ethernet cable, use only a power adapter expressly
recommended by Snom technology. Other power supplies may damage or destroy the device,
aect its behavior, or induce noise.
Avoid placing the cables where people may trip over them or where they may be exposed to
mechanical pressure as this may damage them.
This device is for indoor use only! NOT FOR OUTDOOR USE!
Do not install the device in rooms with high humidity (for example, in bathrooms, laundry rooms,
damp basements). Do not immerse the device in water and do not spill or pour liquids of any kind
onto or into the device.
Do not install the device in surroundings at risk for explosions (paint shops, for example). Do not
use the device if you smell gas or other potentially explosive fumes.
Do not use the device during thunderstorms. Lightning striking the power grid may cause electric
shocks.
Do NOT remove the device's power supply (Ethernet cable when using PoE, power adapter when
not using PoE) when the red light is on or blinking; a rmware update is ongoing. Cutting o the
device's power during a rmware update (red LED on, green LED o) will damage the rmware
and render the PA1+ inoperational. In such cases, it will need to be returned to the vendor for
resetting.
SELV (Safety Extra Low Voltage) Compliance. Safety status of input/output connections comply
with SELV requirements.
Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to
teledevice-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports
contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution
when connecting cables.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom PA1 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom PA1 plus in the language / languages: English as an attachment in your email.

The manual is 1.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info