809892
23
Zoom out
Zoom in
Previous page
1/44
Next page
23
v1.06
Provisioning Guide M900, M700, M300 Settings and Conguration
Server Settings
Setting Valid Value(s) Description
user_host
idx=1-10
e.g. server.snom.com Species the IP or DNS address of the registrar/
proxy where you want to register this account.
Default Value: <empty>
user_outbound idx=1-10 e.g. 10.110.24.111:5060 Specify the outbound proxy in this eld (format:
addr:port) to ensure all SIP packets are sent via
the specied communication point.
Default Value: <empty>
user_expiry idx=1-10 e.g. 3600 Species the maximum time between SIP re-
registrations in seconds.
Default Value: 3600
srv_sip_ua_data_
server_nat_adaption
idx=1-10
disabled / enabled Enables/disables NAT adaption.
Default Value: enabled.
NOTE:
srv_sip_use_one_tcp_
conn_per_ext idx=1-10
o / on Species whether to use one TCP connection per
SIP extension or not.
Default Value: o
user_full_sdp_answer
idx=1-10
o / on When the setting is turned o, the base station
returns a list of all available codecs in the SDP in
response to INVITE requests.
Default Value: o
srv_srtp_auth idx=1-10 o / on Determines whether SRTP authentication is used
or not. This setting has to be enabled when user_
srtp is set to on. Likewise this has to be turned o
when user_srtp is o.
Default Value: o
user_auth_tag idx=1-10 on = AES-32
o = AES-80
When the setting is set to on, the base station
oers an AES-32 auth-tag for SRTP. If turned o,
AES-80 is used.
Default Value: on
srv_use_sip_for_xsi_
login idx=1-10
o: Use the standard
method (SIP login or XSI
login, if stated)
on: Use XSI login with SIP
credentials
When using SIP credentials as XSI authentication,
the base station will make a normal XSI basic
authentication using the SIP credentials. This is not
a standard, but if the XSI server login credentials
match the SIP credentials, this will work.
Default Value: o
srv_sip_server_alias
idx=1-10
e.g. Snom sip server Species the name of the sip server.
Default Value: <empty>
Enabled: When the base station receives a SIP response to a REGISTER request with a “Via” header
that includes the “received” parameter (e.g.: Via: SIP/2.0/UDP 10.1.1.1:4540;received=68.44.20.1), it will
adapt its contact information to the IP address from the "received" parameter. The base station will
then send another REGISTER request with the updated contact information.
Disabled: The base station will ignore the "received" parameter.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M900 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M900

Snom M900 User Manual - English - 80 pages

Snom M900 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info