809892

Snom M900 Manual

27
Zoom out
Zoom in
Previous page
1/80
Next page
27
v1.05
Admin and Installation Guide M900 Conguring
Deregistering/deleting handsets and/or SIP registrations
Fig. 17
• To deregister one or more handsets, click the checkbox to the left of the Idx of the respective
handset(s) and then on the link Deregister Handset(s).
• To delete one or more handsets, click on the checkbox to the left of the Idx of the respective
handset(s) and then on the link Delete Handset(s).
• To delete the SIP registrationof of one or more extensions, click on the checkbox to the left of the
VoIP Idx of the respective extensions(s) and then on the link SIP Delete Extension(s).
Registering M5/M6 repeaters
The maximum number of repeaters per base station is 3 (three). In a single-cell system, the base
station (the DECT sync source) will always be RPN00; the repeaters will be numbered RPN01, RPN02,
and RPN03. In a multicell system, you can look up the RPNs of base stations and repeaters on the
Multicell page of the web user interface.
There are two DECT sync modes, Manual and Local Automatical. Automatic sync mode is
recommended for repeaters registered directly at the base station or - in a multicell system - directly
at the primary or any secondary base station in the chain. When repeaters are daisy-chained to other
repeaters, manual sync mode must be used.
Note: If you have changed the access code (AC) for registering handsets at the base station to a
custom code, you must change it back to the default 0000 to be able to register repeaters.
Automatic registration
When this method is used, the repeater will look for the best base station signal, and the base station
will automatically assign an RPN. This method is recommended for registering repeaters directly at
the base station. To daisy-chain two or three repeaters, use manual registration (see page 29).
1. Open the Repeaters page.
Fig. 1
2. Click on Add Repeater (Fig. 1).
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M900 in the language / languages: English as an attachment in your email.

The manual is 4.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M900

Snom M900 User Manual - English - 44 pages

Snom M900 User Manual - German - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info