621560
20
Zoom out
Zoom in
Previous page
1/38
Next page
20
v1.05
Provisioning Guide M700, M300 Settings and Configuration
Extension Settings
Setting Value(s) Description
subscr_ua_data_
emergency_number
idx=1-200
e.g. 112
Specifies the emergency number for this handset.
Only one number is allowed!
Default Value: <empty>
rtp_collision_control o / on
This setting controls whether the base checks for
RTP collision. RTP collision means that the device
is receiving RTP packages from more than one
source address with same SSRC.
Default Value: o
subscr_sip_line_name
idx=1-200
e.g. Line1
Specifies the line name for the respective
extension on this handset.
Default Value: <empty>
call_waiting
idx=1-200
on / visual / ringer / o
Enables/disables call waiting indication on the
handset.
Default Value: on
user_name
idx=1-200
Specifies the account with which you register to a
SIP registrar/proxy.
Default Value: <empty>
user_active
idx=1-200
o / on
The specific account can be disabled by disabling
this option. This means that the identity is no
longer registered.
Default Value: o
user_pname
idx=1-200
Specifies the user name that is used for
authentication.
Default Value: <empty>
user_pass
idx=1-200
Specifies the password to be used for challenge
responses.
Default Value: <empty>
user_mailbox
idx=1-200
e.g. snom mailbox
Specifies the name for the mailbox that is
associated with the particular SIP identity.
Default Value: <empty>
user_mailnumber
dx=1-200
e.g. voicemail@snom.com
Specifies the number for the mailbox that is
associated with the particular SIP identity.
Default Value: <empty>
user_realname idx=1-
200
e.g Max Mustermann
Set the name that is associated with each line. This
information is also sent out to any party you are
calling.
Default Value: <empty>
fwd_all_enabled idx=1-
200
o / on
If turned on, all calls to the associated identity are
diverted to the number specified.
Default Value: o
fwd_all_target idx=1-200 e.g. 123456
Specifies the redirection target when redirection is
always active.
Default Value: <empty>
fwd_time_enabled idx=1-
200
o / on
If turned on, any incoming call will be diverted to
the specified number after the specified time has
elapsed.
Default Value: o
fwd_time_target idx=1-
200
e.g. 123456
Specifies the redirection target when redirection
after time is active.
Default Value: <empty>
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M700 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M700

Snom M700 User Manual - English - 44 pages

Snom M700 User Manual - English - 84 pages

Snom M700 User Manual - English - 58 pages

Snom M700 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info