621560
14
Zoom out
Zoom in
Previous page
1/38
Next page
14
v1.04
Provisioning Guide M700, M300 Settings and Configuration
Global Settings
Setting Value(s) Description
http_pass e.g. admin Defines the HTTP password for your base station.
Together with http_user it will protect your web
interface.
Default Value: admin
phone_name e.g. snom M700 Defines the name of the base station.
Default Value: snom M700
ntp_server e.g. 10.110.21.254 Specifies the domain name or the IP address of the
NTP server.
Default Value: <empty>
ntp_refresh_timer e.g. 3600 Specify the time in seconds after which the phone
contacts the NTP server again to refresh the time.
Default Value: 3600
vlan_id e.g. 101 This setting sets the VLAN id of the base in order to
connect to anything residing in a specific VLAN.
Default Value: <empty>
vlan_qos e.g. 7 This setting sets the VLAN priority of the base in
order to connect to anything residing in a specific
VLAN.
Default Value: <empty>
dns_server1 e.g. 8.8.8.8 This setting stores the address of the primary DNS
server. If DHCP is disabled, the address of the
primary DNS server has to be entered here.
Default Value: <empty>
dns_server2 e.g. 8.8.4.4 This setting stores the address of the secondary
DNS server. If DHCP is disabled, the address of the
secondary DNS server has to be entered here.
Default Value: <empty>
ip_adr e.g. 192.168.1.2 This setting changes the IP address of the device. If
DHCP is disabled, the IP address must be entered
here.
Default Value: <empty>
netmask e.g. 255.255.255.0 This setting changes the netmask of the device. If
DHCP is disabled, the subnet mask must be entered
here.Default Value: <empty>
gateway e.g. 10.0.0.1 This setting changes the gateway of the device. If
DHCP is disabled, the gateway must be entered here.
Default Value: <empty>
rtp_port_start e.g. 50004 This setting specifies the RTP start port which is
used for RTP trac.
Default Value: 50004
rtp_port_end e.g. 50044 This setting specifies the RTP end port which is used
for RTP trac.
Default Value: 50044
network_id_port e.g. 5060 This setting specifies the SIP port which is used for
SIP trac.
Default Value: 5060
dhcp o / on This setting specifies whether DHCP is enabled or
not. If it is disabled, the base will use the configured
static IP address.
Default Value: on
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M700 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M700

Snom M700 User Manual - English - 44 pages

Snom M700 User Manual - English - 84 pages

Snom M700 User Manual - English - 58 pages

Snom M700 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info