621560
37
Zoom out
Zoom in
Previous page
1/58
Next page
37
v1.02
Admin and Installation Guide M700, M300 Firmware Update
6. Connect the repeater to a power outlet.
7. Press the reset tab on the back of the repeater for approx. 2 seconds until the LED blinks red
briefly and then switches to double green flashes.
Fig. 4
8. On the Repeater page, check the box to the left of the Idx and then click on Register Repeater(s).
Fig. 5
Upon successful registration, the Repeater page will show the repeater's and the base station's
RPNs, the repeater's IPEI, and the state as "Enabled".
Fig. 6
Manual registration
This method must be used for daisy-chaining two or three repeaters. The RPN for the repeater as
well as its DECT sync source must be selected manually from the respective drop-down menus.
1. Open the Repeaters page (Fig. 6, above).
2. Click on Add Repeater.
3. Enter a name for the repeater, for example a consecutive number or its location. If you do not
enter a name, the IPEI will be listed.
Reset tab
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M700 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M700

Snom M700 User Manual - English - 44 pages

Snom M700 User Manual - English - 84 pages

Snom M700 User Manual - English - 38 pages

Snom M700 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info