621560
24
Zoom out
Zoom in
Previous page
1/58
Next page
24
v1.02
Admin and Installation Guide M700, M300 Configuring
Configuring
To be able to use the M-series DECT phones, the base station must be connected to your network's
or your VoIP service provider's PBX, and the handset(s) must be registered at the base station. This
admin guide covers the manual configuration of the base station.
For information on provisioning settings, see "Provisioning Guide M700 and M300 Base Stations".
For information on multicell setup (M700 only), see "Multicell Deployment Guide snom 700".
M-series base stations follow most snom configuration and management schemes. It is
recommended to have a local HTTP/HTTPS server for firmware updates, central configuration
management, and hosting firmware files for base stations, handsets, and repeaters. Handsets and
repeaters are updated over the air by the base station.
Preliminary Steps
Normally the initialization of the base station is completely automatic, using DHCP. If the base station
cannot discover a DHCP server in the subnet, you can set it up manually via its web interface. As
a minimum you will need to enter the IP address, netmask, IP gateway, and DNS server. Your VoIP
service provider or your network may require more data; please ask your provider or your network's
administrator for the requisite input.
Finding the IP Address of the Base Station
You can use any M65 or M25 handset in the vicinity of the base station to find the base's IP address.
The handset does not need to be registered at the base.
1. Connect the base station to your network
2. Press the menu key
on the M65 handset or the center of the navigation key on the M25.
The main menu screen (Fig. 1) will appear on the display.
Fig. 1 Fig. 2
3. Type *47*. The IP Search screen opens (Fig. 2). If your handset detects more than one base
station within range, check the MAC address on the back of your base station and use the
navigation key to select your base.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M700 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M700

Snom M700 User Manual - English - 44 pages

Snom M700 User Manual - English - 84 pages

Snom M700 User Manual - English - 38 pages

Snom M700 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info