621560
31
Zoom out
Zoom in
Previous page
1/44
Next page
31
v1.06
Provisioning Guide M900, M700, M300 Settings and Conguration
Multicell Settings
Setting Valid Value(s) Description
network_sync_enable o / on Species whether multicell mode is enabled or not.
Default Value: o
network_sync_max_sip_
reg_per_base
Valid: 8, 9 ... 30 This setting species the maximum number of
SIP registrations per base station. When a base
station in a multicell system has registered its
maximum, it will attempt to distribute any additional
SIP registration to other base stations in the chain
that are detectable by the handset with the SIP
registration. If this is not possible, the base station
will reject registrations exceeding its maximum.
Default Value: 8
network_sync_primary_
static_ip
Species a static IP to be used as primary data sync
address when communicating via peer-to-peer.
Default Value: 0.0.0.0
network_sync_time e.g. 60 This is the time in seconds for keep-alive packets
to be sent between members of the chain. If no
keepalive packets are received within double
the value of the time, the base will be treated
as unreachable in the multicell setup. Minimum
recommended value is 30.
Default Value: 60
network_dect_sync_tree
idx=1-50
Species the DECT sync ID tree that the base stations
are using as their DECT sync source. It will be
overruled by the setting network_dect_auto_sync_
tree_cong, if that setting is enabled.
If a base's ID for its own index is equal to its own ID,
then this base is the primary DECT sync source.
A secondary base which cannot nd its sync source
or has been turned o will get a value of 240
which will start it looking for any base station and
sync source. This will then enable the system to
recongure itself.
Default Value:0
network_sync_mac_
chain
idx=1–50
This setting is not supposed to be used in
provisioning since it can be critical if the order of
the base stations is changed. The list contains the
chain of Ethernet MAC addresses that are connected
in the specied network. The chain will be created
automatically by the multicell system, but can also
be created by provisioning.
network_sync_static_ip_
chain
idx=1-50
Do not use this setting in provisioning. It is a list
that is only used when multicell and peer-to-peer
synchronization are enabled, and it is automatically
updated by the primary base station when a
secondary base station boots. The list contains the
static IP addresses of all base stations in a peer-to-
peer multicell system and is used to communicate
with the other base stations.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M700 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M700

Snom M700 User Manual - English - 84 pages

Snom M700 User Manual - English - 38 pages

Snom M700 User Manual - English - 58 pages

Snom M700 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info