809901
22
Zoom out
Zoom in
Previous page
1/76
Next page
22
Manually registering via the Web UI
1� Make sure the base station is connected to power and the network
2� If the deskset is displaying the following screen:
a� Press Cancel
The deskset displays “Registration failed”�
b� Press OK
The deskset displays “Device not registered
to base station�”
3� On the “Device not registered to base station�” screen, press Register
4� Press or to scroll to Manual start on WUI and press Select
The handset displays the following screen:
5� Using the base station’s IP address, open the base station’s WebUI in a web
browser
NOTE: If your phone system is a multi-cell environment, you must open the
Primary base station’s WebUI� To check, click Status in the WebUI sidebar, and
then click Base Status� See which base station IP address is set to “Primary
mode� Open the WebUI for this IP address�
6� On the WebUI, click Status and then click Cordless Registrations
7� Under Manual registration, click Start
The WebUI displays “Success / Registration started”�
8� Press the # key on the deskset to begin registration�
The deskset displays “Registering��� Please Wait�”
If registration is successful:
The deskset beeps and displays “Deskset
Registered”, and then displays the idle screen�
If registration fails:
The deskset beeps and displays “Registration
failed”�
a� Press OK� The deskset displays “Device not registered to base station�”
b� Make sure the deskset is near the base station�
c� If your phone system is a multi-cell environment, make sure you are
registering to the Primary base station� Click Status in the WebUI sidebar,
and then click Base Status� See which base station IP address is set to
“Primary” mode� Open the WebUI for this IP address�
d� Try to register again; go to step 3�
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M58 in the language / languages: English as an attachment in your email.

The manual is 50.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info