809901
19
Zoom out
Zoom in
Previous page
1/76
Next page
19
Deskset Registration
The deskset must be registered to the base station in order to make and receive calls�
When you power up the deskset for the first time, it will attempt to auto-register to
the base station� Auto-registration will be successful only if you have set up the M500
configuration file with the deskset IPEI, or you have entered the IPEI on the Primary
base station’s WebUI�
Auto-registering the deskset to the base station
1� Make sure the base station is connected to power and the network
2� If the deskset is displaying the following screen:
a� Wait for the deskset to auto-register
b� If the IPEI has not been set up in the
configuration file (provisioned), or the auto-
registration is taking too long, press Cancel
3� If the deskset is displaying the following screen:
a� Press Register� The deskset displays the
“Register via” menu�
b� Press or to scroll to Auto reg or IPEI
input, and press Select
The deskset displays “Trying to auto-
register���”
c� Wait for the deskset to auto-register
d� If auto-registration is taking too long, press
Cancel
If registration is successful:
The deskset beeps and displays “Deskset
registered”, and then displays the idle screen�
If registration fails:
The deskset displays “Registration failed”�
1� Press OK
The deskset displays “Device not registered to base station�”
2� Press IPEI to display the phone’s IPEI and
serial number� Give these numbers to your
phone administrator
3� Press Back
4� To manually register your deskset, follow
the steps in “Manually registering via the
LINK key on base station” on page 21 or “Manually registering via the
Web UI” on page 22�
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M58 in the language / languages: English as an attachment in your email.

The manual is 50.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info