809899
21
Zoom out
Zoom in
Previous page
1/212
Next page
Introducing the M500 21 Back to Contents
M500 Administrator and Provisioning Manual
How to set the base station operating mode or factory reset
using the LINK button
When an M500 base station is brand new out of the box, its default operating mode is
Single. You can use the LINK button on the base station to change its mode to Primary or
Secondary. You can also change a base station's mode back to Single by performing a
factory reset. Follow the steps below.
1. Press and hold the LINK button on the base station for at least 20 seconds.
All LEDs turn off.
2. Press the LINK button (for less than 2 seconds) to activate the sub-menu.
The SIP or LINK LEDs flash in alternating colors to indicate the currently selected
sub-menu option.
3. To move to the next sub-menu option, press the LINK button (for less than 2 seconds).
Repeat until the desired sub-menu option is indicated by the flashing SIP or LINK
LEDs.
4. To select the sub-menu option indicated by the flashing SIP or LINK LEDs, press and
hold the LINK button for at least 2 seconds.
If all three LEDs are flashing green, then you did not hold the LINK key long
enough. Wait 5 seconds for the three LEDs to stop flashing green, and then
try step 1 again.
Sub-menu option SIP LED LINK LED
Change operating mode to
Primary
Flashing green/red Off
Change operating mode to
Secondary
Off Flashing green/red
<empty>
Reserved for future use
Flashing orange/red Off
<empty>
Reserved for future use
Off Flashing orange/red
<empty>
Reserved for future use
Flashing orange/green Off
Factory Reset AND change
operating mode to Single
Off Flashing orange/green
If 10 seconds has elapsed without pressing the LINK button, the sub-menu will
time out and the base station LEDs will display their normal status indications.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M500 in the language / languages: English as an attachment in your email.

The manual is 7.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info