809890
73
Zoom out
Zoom in
Previous page
1/76
Next page
73
v1.01
Admin and Installation Guide M400 Description of Settings
Setting Description
Base station name The name can be edited in the Management settings.
Active Dect Ext Number of active DECT MAC connections to extensions. Type of connection is
mm/Ciss/CcOut/CcIn
Active Dect Rep Number of active DECT MAC connections to repeaters. Type of connection is
mm/Ciss/CcOut/CcIn
Active Dect Location Gateway Number of active DECT MAC connections to location gateways. Type of
connection is mm/Ciss/CcOut/CcIn.
Active RTP Number of active RTP streams used. Types of streams are Local RTP stream/
Broadcast Receive RTP stream
Active Relay RTP Number of active RTP relay streams used. Types of streams are Local RTP
relay stream/Remote RTP relay stream.
Latency (ms) (avg min/
average/avg max)
Ping latency between base station performed by base index 0.
Average minimum delay/average delay/average maximum delay)
Extensions
Idx Index number of the extension
No of HS restarts Displays the number of times the handset has restarted
Latest HS restart Displays the dcate and time of the last handset restart
Logging
RSX internal tracing Can be enabled or disabled. If enabled, the traced data should be sent to
Snom since it can only be investigated by Snom engineers
PCAP internal tracing This feature allows the user to choose which trace to investigate by selecting
the desired parameter.
Trace packets to/from If selected, all Ethernet packets sent to/from the base station’s MAC address
will be traced. Broadcast packets sent from the base are also being traced
Trace received IPv4 multicast
packets
If selected, all received IPv4 multicast packets will be traced.
Trace received packet with
destination MAC in between
If selected, each byte of the received destination MAC is checked to verify if it
is in the trace range.
Trace received ethertype If selected, the user can select up to three received Ethertypes to trace.
Trace received IPv4 protocol If selected, the user can select up to three received IPv4 protocols to trace.
Trace received TCP/UDP port If selected, the user can select up to 3 received TCP/UDP ports to trace.
Conguration

BrowseLoad. To export the
settings, click on Export.

300" at https://service.snom.com, DECT.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M400 in the language / languages: English as an attachment in your email.

The manual is 2.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info