621561
52
Zoom out
Zoom in
Previous page
1/58
Next page
52
v1.02
Admin and Installation Guide M700, M300 Firmware Update
Setting Description
Handset State Present, detached, located, removed, enabled,.
Present@RPNxx: The handset is located at the base station with RPNxx (radio
fixed part number).
Detached: The handset is turned o.
Located: The handset is configured to locate on a specific base station, but is
unable to do so (e.g., the base station is turned o).
Removed: The handset has not been used for a specified amount of time.
Enabled: Registration has been set up for handset, but handset has not
registered yet.
Handset Type FW Info Type of handset (e.g., M65) and firmware version (e.g., 324.7) on the handset
FWU Progress During a firmware update, this field displays the update's progress.
O: No update in progress
Initializing: Update is starting
x%: Update in progress, x percent done
Verifying x%: Update writing completed, FW verification ongoing
Waiting for charger: Firmware has been transmitted to handset; update will
begin when handset is placed in charger.
Conn. term.wait: Firmware has been transmitted to repeater; update will
begin when system is idle.
Complete: Firmware on handset/repeater has been updated
Error: Unable to update (file not found, file invalid etc.)
VoIP Idx Index of configured SIP extensions, numbered consecutively by the base
station. With checkbox for selecting the extension for SIP registration and
deregistration.
Extension The extension number that is also shown on the handset's display
Display Name Optional. If entered, the name will be shown on the handset's display.
Server The server selected on the Add extension/Edit extension page.
Server Alias The server alias set on the Servers page.
State SIP registration state. If the field is empty, the handset is not SIP-registered.
Add/Edit Extension
These pages are used to configure new extensions and to edit existing ones, respectively. The two
pages contain the same settings. Handset selection, Extension setting, and Server selection are
mandatory. The remaining settings depend on the requirements of your PBX or VoIP provider and can
be left blank, if nothing is required.
To open the Add extension page, click on Add extension (Fig. 2).
To open the Edit extension page, click on the Extension number (Fig. 2).
Fig. 2
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 44 pages

Snom M300 User Manual - English - 84 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info