621561
15
Zoom out
Zoom in
Previous page
1/58
Next page
15
v1.02
Admin and Installation Guide M700, M300 Setting Up
Introduction
In a typical telephony system, the M-series base station is connected to the local area network (LAN)
which, in turn, is connected to a PBX or an IP Service Provider. The base station converts IP protocol
to DECT protocol and transmits phone calls to and from the DECT handsets.
To be able to use the M-series DECT phones, the base station must be connected to your LAN and the
handset(s) must be registered at the base station. This admin guide covers the manual configuration
of one base station.
For information on multicell setup (M700 only), see "Multicell Deployment Guide snom 700".
For information on provisioning settings, see "Provisioning Guide M700 and M300 Base Stations".
M-series base stations follow most snom configuration and management schemes. It is
recommended to have a local HTTP/HTTPS server for firmware updates, central configuration
management, and hosting firmware files for base stations, handsets, and repeaters. Handsets and
repeaters are updated over the air by the base station.
Normally the initialization of the base station is completely automatic, using DHCP. If the base station
cannot discover a DHCP server in the subnet, you can set it up manually via its web interface. As
a minimum you will need to enter the IP address, netmask, IP gateway, and DNS server. Your VoIP
service provider or your network may require more data; please ask your provider or your network's
administrator for the requisite input.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 44 pages

Snom M300 User Manual - English - 84 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info