621561
30
Zoom out
Zoom in
Previous page
1/44
Next page
30
v1.06
Provisioning Guide M900, M700, M300 Settings and Conguration
Multicell Settings
Multicell Settings
Setting Valid Value(s) Description
network_allow_multi_
primary
o / on This setting species whether the conguration of
multiple primaries in a network is allowed or not.
Default Value: o
network_auto_multi_
primary
o (1) / on (2) This setting species whether auto conguration is
enabled/disabled for multiple primaries in a chain.
(1,2)
Default Value: o
(1)
When set to o, one primary base station and one or more secondary base stations are allowed per
multicell system on a network (LAN). When the primary base station is down or removed from the system,
the system will dene a backup primary base station. Any of the secondaries can be used.
(2)
When set to on, there are two options. Please see M700 Multicell Deployment Guide for more information.
A multicell system with 2 or more separate cell systems with the same system chain ID in one network
(LAN), each cell system with its own primary base station.
A multicell system with one primary base station and 2 separate cell systems with the same system
chain ID in one network (LAN), The primary is located between the two cell systems, its DECT range
overlapping with each of them.
network_dect_auto_
sync_tree_cong
o / on Species whether the DECT sync tree is
automatically congured or not.
Default Value: on
network_roaming_
deregister
o / on This setting species how SIP registrations are
handled when a handset roams from one base
station to another.
Roaming is dened as the procedure when the
handset moves its SIP and DECT registration from
one base station to another. Some PBXs are capable
of handling multiple SIP bindings per SIP user and,
consequently, when a new SIP registration is made
from a dierent base, the old SIP registration will
still be valid. As a consequence, this registration has
to be deactivated.
Other PBXs always use the latest SIP registration
and therefore no deregister is needed.
"O" means that no sip deregister takes place when
a handset roams from one base to another, while
"on" means that the old SIP registration is deleted
when a handset roams from one base to another.
Default Value: o
network_sync_chain_id Valid: Up to 5 digits Species the identity of a given multicell chain.
This is used to identify dierent chains in the same
location.
Default Value: 512
network_sync_data_
transport
multicast / peer-to-peer Species the data transport method for multicell
setups.
Default Value: <empty>
network_sync_debug_
enable
o / on Species whether the network sync debug is enabled
or not.
Default Value: o
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 84 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info