621561
22
Zoom out
Zoom in
Previous page
1/44
Next page
22
v1.06
Provisioning Guide M900, M700, M300 Settings and Conguration
Server Settings
Setting Valid Value(s) Description
srv_sip_cli_mode idx=1-
10
0: PAI - From
1: From
2: (cid=) in Alert-Info - PAI
- From
This parameter denes the priority with which
the base will look for CLI information in incoming
SIP messages. Please note that the from header
will always be used as CLI source if none of the
selected header(s) is present.
Default Value: 0
srv_sip_enable_blind_
transfer idx=1-10
o / on Species whether blind transfer is enabled or not
Default Value: on
timer_support idx=1-10 o / on Dene whether sip-stack should support the use of
timers. Includes adding headers "Session-Expires"
and "Min-SE".
Default Value: on
user_hold_inactive
idx=1-10
o / on Specify if you want to indicate a hold request with
sdp parameter send-only or inactive. Some pbx's
need the inactive setting for proper music-on-hold
operation.
Default Value: o
keepalive_interval
idx=1-10
o / on Species whether keepalive message will be sent
out to the registrar/proxy port in order to have the
port stay open and the phone remain reachable.
Default Value: on
srv_sip_rtp_base_equal
idx=1-10
disabled / enabled Enables/disables RTP from own base station.
Default Value: disabled
codec_size
idx=1-10
20, 30, 40, 60 Species the packet size in ms for the respective
codec.
Default Value: 20
srv_sip_server_alias
idx=1-10
Alias for the given SIP server.
Default Value: <empty>
session_timer
idx=1-10
e.g. 3600 If timer_support is enabled, this option species
the SIP session timer in seconds.
Default Value: 3600
srv_sip_show_ext_
name_in_hs
idx=1-10
o / on Species whether the extension is shown on the
handset idle screen or not.
Default Value: on
srv_sip_signal_tcp_port
idx=1-10
o / on Species whether to signal TCP source port or not.
Default Value: on
srv_sip_transport
idx=1-10
udp / tcp / tls Species the transport protocol used for SIP
messages.
Default Value: udp
codec_priority_list
idx=1-10
pcmu, pcma, g729, g722,
g726
Prioritize which codecs the base should use.
Prioritized comma-separated list with max. of 5
entries, most desired codec up front.
Default Value: pcmu, pcma, g726
conferencing
idx=1-10
e.g. conferencing.snom.com This setting species the address or FQDN of a
conference server.
Default Value: <empty>
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 84 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info