621561
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
v1.06
Provisioning Guide M900, M700, M300 Settings and Conguration
Global Settings
Setting Valid value(s) Description
phonebook_lename e.g. phonebook.xml Filename of the phonebook if
phonebook_server_location and phonebook_location
have been set.
Default Value: <empty>
phonebook_location http://192.168.1.2/
directory/
Species the location of the phonebook if
phonebook_server_location = 0. Setting has to be
used in conjunction with phonebook_lename.
Default Value: <empty>
phonebook_reload_time e.g. 10 Phonebook reload time in (s) if phonebook_server_
location = 0.
Default Value: <empty>
phonebook_server_
location
0 = Local
1 = LDAP
2 = XML
Denes what type of phonebook is used. "Local"
means the Central Directory imported onto the base
station and accessible to all handsets/base stations
in the installation (single cell or multicell).
Default Value: 0
repeater_legacy_
support
o / on This setting controls whether legacy repeaters are
supported or not.
Default Value: o
rsx_trace_internal disabled / enabled Enables downloading traces collectively from all
base stations in a multicell setup
Default Value: disabled
rtp_collision_control o / on This setting controls whether the base station
checks for RTP collision. RTP collision means that
the device is receiving RTP packages from more
than one source address with same SSRC.
Default Value: o
sip_check_sync_always_
reboot
o / on Species whether the base station shall reboot
at reception of a SIP NOTIFY with check-sync
regardless of the reboot parameter being present.
Values:
0: Disabled, meaning reboot=TRUE must be present
to force the base station to reboot.
1: Enabled. The base station will always reboot.
Default Value: o
sip_conf_key_dtmf_
string
This string species the DTMF that is sent via SIP
when the conf key is pressed. Not applicable to all
congurations.
Default Value: <empty>
pnp_cong o / on Enable/disable PNP provisioning.
Default Value: on
enable_rport_rfc3581 o / on Enables or disables rport parameter for the Via
header eld. The default setting allows a client to
request that the server send the response back
to the source IP address and port from which the
request originated.
Default Value: on
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M300 in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M300

Snom M300 User Manual - English - 84 pages

Snom M300 User Manual - English - 38 pages

Snom M300 User Manual - English - 58 pages

Snom M300 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info