809888
15
Zoom out
Zoom in
Previous page
1/68
Next page
15
v1.03
M215SC User Manual Setting Up
Use only
Supplied
Adapter
DC 5V
RESET
(1), (2)
Network &
Power over Ethernet
Reset key
(1) If no PoE available
(2) Not included in delivery
Fig. 1
Standing Unit
1. Connect the Ethernet cable to the RJ45 jack on the side of the device (see Fig. 1, above) and to your network
router or switch.
2. If a power adaptor is necessary, connect it to the coaxial connector on the side of the device (see Fig. 1,
above) and to an electrical wall outlet.
Wall Mounting
Prior to mounting the device on the wall, you must attach the wall bracket to the back of the base station. The
bracket has two holes for hanging the unit on two screws or hooks on a wall.
Note: Screws/hooks and wall anchors are not included in the delivery. Use screws and wall
anchors suitable for your wall. Select screws with heads of a minimum of 5 mm (0.1969") in
diameter.
1. Attaching the wall bracket.
Insert tab
in slot
Insert tab
in slot
50 mm
(1.969")
Fig. 2 Fig 3
a. Insert the short tab (Fig. 2, step 1) on the bracket in the slot at the top of the base station.
b. Insert the longer tab (Fig. 2, step 2) on the bracket in the slot in the base station's footstand until it
clicks into place. Check to make sure the bracket is securely attached to the base station.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200SC in the language / languages: English as an attachment in your email.

The manual is 7.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M200SC

Snom M200SC User Manual - German - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info