809886

Snom M200 SC Base Station Manual

94
Zoom out
Zoom in
Previous page
1/120
Next page
94
v1.01
M200SC Administrator and Provisioning Manual Configuration file parameter guide
log Module: System Log Settings
The log settings control system logging activities. System logging may be required for troubleshooting
purposes. The following logging modes are supported:
◦Serial/Console—system log output to an external console using a serial/RS-232 cable
◦Syslog server—output to a log file on a separate server
◦Volatile file
The log settings follow the format log.[element].
All log settings are included in the general configuration file.
Setting: log.syslog_enable
Description: Enables or disables log output to syslog server.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting: log.syslog_server_address
Description: Sets the syslog server IP address.
Values: IPv4, IPv6 or FQDN Default: Blank
Setting: log.syslog_server_port
Description: Sets the syslog server port.
Values: 1–65535 Default: 514
Setting: log.syslog_level
Description: Sets the log level. The higher the level, the larger the debug output.
5—all
4—debug
3—info
2—warning
1—error
0—critical
Values: 0–5 Default: 2
… 94 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info