809886
87
Zoom out
Zoom in
Previous page
1/120
Next page
87
v1.01
M200SC Administrator and Provisioning Manual Configuration file parameter guide
Setting: provisioning.schedule_mode
Description: Sets the type of schedule check for configuration and firmware files.
Values: disable, interval, weekday Default: disable
Setting: provisioning.resync_time
Description: Sets the interval (in minutes) between checks for new firm-
ware and/or configuration files.
Values: 0–65535 Default: 0 (OFF)
Setting: provisioning.weekdays
Description: Sets the day(s) when the device checks for new firmware
and/or configuration files. Enter a comma-delimited list of
weekdays from 0 (Sunday) to 6 (Saturday). For example,
5,6,0 means the provisioning check will be performed on
Friday, Saturday and Sunday.
Values: 0–6 Default: Blank
Setting: provisioning.weekdays_start_hr
Description: Sets the hour when the device checks for new firm-
ware and/or configuration files.
Values: 0–23 Default: 0
Setting: provisioning.weekdays_end_hr
Description: Sets the hour when the device stops checking for new firm-
ware and/or configuration files.
Values: 0–23 Default: 0
Setting: provisioning.remote_check_sync_enable
Description: Enables or disables remotely triggering the device to check for new
firmware and/or configuration files. The file checking is triggered
remotely via a SIP Notify message from the server containing the
check-sync event.
Values: 0 (disabled), 1 (enabled) Default: 1
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info