809886

Snom M200 SC Base Station Manual

67
Zoom out
Zoom in
Previous page
1/120
Next page
67
v1.01
M200SC Administrator and Provisioning Manual Configuration file parameter guide
Configuration file parameter guide
This chapter lists the available options for all the settings within the M200SC configuration file. Most settings
in the configuration file have an equivalent in the WebUI (see the settings tables in "Configuration using the Web
user interface (WebUI)" on page 17). However, the options you must enter when editing the configuration file
have a dierent syntax and format.
The settings are divided into modules. Most modules correspond to a page on the M200SC WebUI. You may
want to reorganize the modules within the configuration file itself. The configuration file settings can be listed
in any order, and the configuration file will still be valid.
The device supports the XML representation of settings and modules via an XML structure. The settings XML
representation is structured into sub tags. Settings are either valid globally for all sip accounts or account-
specific, grouped into modules.
One module example is sip_account, which holds the supported per account/identity settings and its values.
Short form for sip account 1:
sip_account.1.sip_account_enable=1
sip_account.1.display_name=1001
sip_account.1.user_id=030398331001
In this document all settings are in short form representation, which directly translates to XML
as demonstrated in the following examples.
short form:
network.ip.dhcp_enable
XML form:
<?xmlversion=”1.0”?>
<settings>
<network>
<ip>
<dhcp_enable>1</dhcp_enable>
</ip>
</network>
</settings>
short form:
sip_account.1.sip_account_enable=1
sip_account.1.display_name=1001
sip_account.1.user_id=030398331001
XMLformwithindex:
<?xmlversion=”1.0”?>
</settings>
<sip_account>
<idxid=”1”>
<sip_account_enable>1</sip_account_enable>
<display_name>1001</display_name>
<user_id>030398331001</user_id>
</idx>
</sip_account>
</settings>
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info