809886

Snom M200 SC Base Station Manual

8
Zoom out
Zoom in
Previous page
1/120
Next page
8
v1.01
M200SC Administrator and Provisioning Manual Introducing the M200SC
Network requirements
A switched network topology is recommended for your LAN. The oce LAN infrastructure should use Cat.-5/
Cat.-5e cable.
The M200SC requires a wired connection to the LAN. Wireless connections from your LAN to other devices (such
as laptops) in your oce will not impede performance.
A Dynamic Host Configuration Protocol (DHCP) server is recommended and must be on the same subnet as the
M200SC base stations so that IP addresses can be auto-assigned. In most cases, your network router will have a
DHCP server. By default, the M200SC has DHCP enabled for automatic IP address assignment.
Note: Some DHCP servers have default settings that limit the number of network IP addresses
assigned to devices on the network. You should log in to your server to confirm that the IP range
is sucient.
If no DHCP server is present, you can assign a static IP to the M200SC. You can assign a static IP address using
the handset handset menu. Go to Admin settings > Network setting > IPv4 or IPv6 > Set static IP. ` If you do not
have a DHCP server or do not manually assign static IPs, you will not be able to access the WebUI and/or enable
automatic time updates from an NTP server.
A DNS server is recommended to resolve the path to the Internet and to a server for firmware and configuration
updates. If necessary, the system administrator can also download upgrade files and use the WebUI to update
the M200SC firmware and/or configuration settings manually.
Figure 1. M200SC Installation Example
M200SC configuration methods
You can configure the M200SC using one of the following methods:
◦ From the M15SC and M45SC handsets, using the handset menus. The handset menus are best suited
to configuring a few settings, perhaps after the initial setup has been done. For administrators, the
settings available on the handset menus include network settings, account settings, and provisioning
settings. See "Using the admin settings menu" on page 12. Many of the settings accessible on the
handsets are most useful for end users. Through the menu, they can customize the screen appearance,
sounds, and manage calls. For more information, see the M215SC User Guide.
◦ The Web User Interface, or WebUI, which you access using your Internet browser. See "Configuration
using the Web user interface (WebUI)" on page 17. The browser-based interface is easy to navigate
and best suited to configuring a large number of M200SC settings at once. The WebUI gives you
access to every setting required for configuring a single device. You can enter service provider account
settings on the WebUI, assign accounts to handsets, and set up provisioning, which will allow you to
automatically and remotely update the M200SC after initial configuration.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200 SC Base Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200 SC Base Station in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info