809896
110
Zoom out
Zoom in
Previous page
1/190
Next page
Provisioning Using Configuration Files 110 Back to Contents
M100 KLE Administrator and Provisioning Manual
The Provisioning Process
The automatic provisioning process is as follows:
1. Check for new or updated configuration files. For file-checking options, see
“Provisioning” on page 95 and “Resynchronization: configuration file checking” on
page 111. The M100 KLE maintains a list of the last loaded provisioning files. The M100
KLE compares its current configuration against the files it finds on the provisioning
server.
If provisioning has been triggered by the resync timer expiring or by remote
check-sync, the M100 KLE checks for updated files after one minute of inactivity.
2. Download the configuration files.
If any file on the provisioning server has changed, the M100 KLE treats it as a new file
and downloads it.
If the provisioning URL specifies a path only with no filename, then by default the M100
KLE looks for and retrieves the following two files:
General file: <model>.cfg.
MAC-specific file: <model>_<MAC Address>.cfg.
The <model> variable is the Snom product model: M100 KLE, for example.
If the provisioning URL specifies both a path and filename, then the M100 KLE retrieves
only the configuration file specified.
3. The M100 KLE restarts after one minute of inactivity.
During provisioning, the M100 KLE reads the configuration file and validates each module
and setting. The M100 KLE considers a setting valid if it is:
a valid data type
formatted as a valid setting
within a valid data range
part of a module that passes an integrity check. That is, the module's settings are
consistent and logical. For example, in the "network" module, if DHCP is disabled,
but no static IP address is specified, the module will fail the integrity check and
none of the settings will apply.
Invalid modules or invalid settings are skipped and logged as ERROR messages in the
system log, but will not interrupt the provisioning process. The system log will include the
module parameters that have not been applied. A recognized module with unrecognized
settings will cause all other settings in that module to be skipped.
A successful configuration or firmware update is reported as an INFO message in the
system log.
See “Configuration File Parameter Guide” on page 117 for the options and value ranges
available for each configuration file setting.
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M100 KLE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M100 KLE in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info